Home :: Communications :: Serial Servers :: SE5001 RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

SE5001 RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

SE5001 RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

The Industrial Serial Server SE5001 is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network.

By encapsulating serial data and transporting it over Ethernet, SE5001 offers full-duplex and bi-directional data that is transmission transparent between the serial port and the Ethernet network.

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or a downloadable Windows utility. Packed in a rugged metal housing for wall or DIN-Rail mount with 5 VDC or 9 to 30 VDC wide power input range, SE5001 is ideal for almost any industrial and manufacturing automation.

ATOP Virtual COM software provides existing Windows based application to access serial device by mapping the Virtual COM port to a remote serial server via Ethenet. Windows software works with XP, Vista and 7. TTYredirector software is downloadable from ATOP for 32 bit and 64 bit, x86 Linux.

In industrial and manufacturing automation fields, SE5001 is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Specifications:

Ethernet
Compliance: IEEE802.3
Port: 1-port
Transmission Rate: 10/100Mbps Auto-detection
Connector: RJ-45
Auto MDI/MDI-X: Yes
 
Link Mode
TCP Server: Single connection or Virtual Com mode
TCP Client: Single destination or Virtual Com mode
UDP: Up to 4 Ranges of IPs
 
Serial
Interface: RS-232/422/485 software selectable
Ports: 1-port
Baud Rate: 1200bps to 230 kbps
Parity: None, Odd, Even, Mark, Space
Data Bits: 7, 8
Stop Bits: 1, 2
Flow Control: None, Software: Xon/Xoff, Hardware: RTS/CTS
Protection: 15 kV ESD
Connector: 5 pin, 3.81 mm terminal block
 
Power
Input: 5 VDC or 9 to 30 VDC
Consumption: ≤1.5 W
 
Approval
EMC: FCC Class A, CE Class A
 
Environment
Operating 0°C to 60°C ( 32º to 140ºF )
Storage: -40º to 85ºC ( -40º to 185ºF ), 5 to 95%RH
 
Dimension
W x H x D: 65 x 78 x 28mm
 
Software
Configuration: Web Page / Telnet / Serial console / Windows utility
Virtual Com: Windows and Linux port redirection software
Support Protocol: ICMP, TCP(UDP) / IP, DHCP client,  SNMP, HTTP

Documents:

Support:


SKU:  ATO-101

6 available

6 available

Qty. Price
(AUD ex. GST)
1 to 4 $159.00
5 to 9 $143.10 (10% off)
10+ $135.15 (15% off)

Categories