Home :: Communications :: Serial Servers :: SE5404D 4 Port RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

SE5404D 4 Port RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

SE5404D 4 Port RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server

The Industrial Serial Server SE5404D is a cost effective 4 port gateway for Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network.

By encapsulating serial data and transporting it over Ethernet, SE5404D offers full-duplex and bi-directional data that is transmission transparent between the serial port and the Ethernet network.

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or a downloadable Windows utility. Packed in a rugged metal housing for wall or DIN-Rail mount with 9 VDC or 9 to 48 VDC wide power input range, SE5404 is ideal for almost any industrial and manufacturing automation.

ATOP Virtual COM software provides existing Windows based application to access serial device by mapping the Virtual COM port to a remote serial server via Ethenet. Windows software works with XP, Vista and 7. TTYredirector software is downloadable from ATOP for 32 bit and 64 bit, x86 Linux.

In industrial and manufacturing automation fields, SE5002 is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.


Transmission Rate:10/100Mbps Auto-detection
Auto MDI/MDI-X:Yes
Link Mode
TCP Server:up to 4 connections or Virtual Com mode
TCP Client:up to 2 destination or Virtual Com mode
UDP:Up to 8 Ranges of IPs
Interface:RS-232/422/485 software selectable
Ports:4 independent serial ports
Baud Rate:300 bps to 921 kbps
Parity:None, Odd, Even, Mark, Space
Data Bits:7, 8
Stop Bits:1, 2
Flow Control:None, Software: Xon/Xoff, Hardware: RTS/CTS
Protection:15 kV ESD
Connector:7 pin, 5.08 mm connector for redundant terminal block
Input:9 to 48 VDC
Consumption:≤1.5 W
EMC:FCC Class A, CE Class A
Operating-40 to 80 °C (-40º to 176 ºF)
Storage:-40 to 85 ºC (-40º to 185 ºF), 5 to 95% RH
W × H × D:54 × 146 × 120 mm
Configuration:Web Page / Telnet / Serial console / Windows utility
Virtual Com:Windows and Linux port redirection software
Support Protocol:ICMP, TCP(UDP) / IP, DHCP client,  SNMP, HTTP



SKU:  ATO-115

Qty. Price
(AUD ex. GST)
1 to 4 $599.00
5 to 9 $539.10 (10% off)
10+ $509.15 (15% off)