Home :: Signal Conditioners :: Load Cell :: 2 mv/V Load Cell to 0 to 10 V Transmitter

2 mv/V Load Cell to 0 to 10 V Transmitter

2 mv/V Load Cell to 0 to 10 V Transmitter

These tiny load cell or strain gauge transmitters measure just 52 × 22 × 18 mm. They provide a 5 V excitation to your load cell and the output of the load cell is then converted to a 0 to 10 V signal.

Span and zero adjustment trimpots can be accessed under rubber plugs on the conditioner's body.

Features:

.

  • Small size: just 52 × 22 × 18 mm!
  • 3-wire 0 to 10 VDC output (2 metre cable)
  • Provides a regulated 5 V excitation voltage for the load cell
  • Backed with double-sided tape for flexible placement
  • ±0.25% Full scale accuracy
  • Supply voltage from 14 to 30 VDC
  • Low cost and high stability

Specifications:

Accuracy:±0.25 % Full scale
Output:0 to 10VDC
Zero adjustment:±20 % Full scale
Span adjustment:±20 % Full scale
Output response Time (0 to 90 %):100 ms
Output ripple:±0.1 % Full scale
Temperature coefficient:100 ppm/°C
Operating temperature:0 to 60 °C
Operating humidity:20 to 90 % non-condensing
Storage temperature:0 to 70 °C
Storage humidity:20 to 90 % non-condensing
Dimensions:52 × 22 × 18 mm
Cable:2 m, 3 wire

Documents:

This unit is the manufacturer part SW-L23D2. The datasheet lists other options, a selection of which we carry. If you're after a combination of options we don't stock, contact us for pricing and availability.

Download datasheet

Support:


SKU:  AXS-502

2 available

2 available

Qty. Price
(AUD ex. GST)
1 to 4 $99.00
5 to 9 $89.10 (10% off)
10+ $84.15 (15% off)

Categories