Home :: Sensors :: Capacitive Proximity :: M18 Shielded Capacitive Proximity Sensor Plastic Body NPN Out

M18 Shielded Capacitive Proximity Sensor Plastic Body NPN Out

M18 Shielded Capacitive Proximity Sensor Plastic Body NPN Out

Capacitive proximity sensors switch in the presence of metallic and non-metallic objects. These sensors can detect almost any liquids and solids. A small control on the back of the sensor adjusts the triggering threshold. These sensors take 10 to 30 V DC and have a normally open NPN-type output. The rear of the sensor has an LED indicator that lights when the sensor is triggered.

The sensor has an 18 mm diameter threaded body, allowing easy mounting and adjustment. 8 mm sensing distance.

Specifications:

Rated operational voltage:24 V DC
Supply voltage:10 to 30 V DC
Voltage drop:≤ 1.5 V
Load current capacity:200 mA
Sensing Distance:8 ? (Volume variation)
Setting Distance0 ~ 6.4 mm
Hysterisis:Less than 20 % of sensing distance
Protection:Reverse polarity
Response Frequency:50 Hz
Ambient temperature range:-25 to 70 °C
IP ratings:IP67
Housing material:PBT Resin
Material of sensing face:PBT Resin
Function indication:Red LED
Connection:Bare wire
No. of wires × gauge:3 × 0.12 mm
Cable Length:2 m

Please note if you are intending to use these sensors to switch an inductive load, please refer to the "Inductive Load Switching Protection" file, before you begin wiring up your inductive load to the sensor.

Documents:

Support:


SKU:  HNS-0510

In Stock, 8 available

In Stock, {{items}} available

Qty. Price
(AUD ex. GST)
1 to 4 $49.00
5 to 9 $44.10 (10% off)
10+ $41.65 (15% off)
Compare product with:

Categories