Home :: Data Acquisition :: LabJack Accessories :: RB16 - LabJack U12 Relay Board

RB16 - LabJack U12 Relay Board

RB16 - LabJack U12 Relay Board

The RB16 provides a versatile method for electricians, engineers, and other qualified individuals, to interface a PC with high voltages/currents. A row of screw terminals provides the interface to the high level isolated signals. These can be either 120/240-volt AC signals or 3 to 60 volt DC signals.

The DB25 connector provides the interface to standard logic level signals (+5 volt levels).The included DB25 cable connects the RB16 to a LabJack U12. The RB16 has sockets for mounting up to 16 industry standard mini I/O modules (not included). The user can also install a resistor to bypass each socket and pass through the standard digital I/O line.

Please Note:The card doesn't come with relays loaded, it is a bare PCB that will accept either 16 miniature style relays or 8 standard size relays. I/O modules are available from a variety of manufacturers such as Grayhill, Crydom, or Kyoto, and allow the LabJack U12 to control or monitor 120/240 VAC and/or 3-60 VDC. See the Document section for links.

DB25 Connector Pin Out:

DB25 Pin NoOutput Control
1R0
2R1
3R2
4R3
5R4
6R5
7R6
8R7
9NC
10VCC
11VCC
12VCC
13VCC
14GND
15GND
16GND
17GND
18R8
19R9
20R10
21R11
22R12
23R13
24R14
25R15

Documents:

Figure 1.0: RB16 Schematic

Figure 1.1: RB16 Dimension Sketch

List of suppliers for the suitable I/O modules

Please note: that you are not limited to just Digikey for the suitable I/O modules, you other options include: Grayhill & Crydom

Support:


SKU:  LAJ-016

1 available

1 available

Qty. Price
(AUD ex. GST)
1+ $112.50

Categories