- per page
| CB15 - LabJack Terminal Board | SKU: LAJ-014 |
Provides convenient screw terminal access to 12 digital I/O available on a DB15 connector. Read more…
| CB25 - Labjack Terminal Board for Digital I/O | SKU: LAJ-002 |
Screw terminal connections, with short-circuit and overvoltage protection, for the extra 16 digital I/O on the LabJack U12. Read more…
| CB37 - LabJack UE9 Terminal Board | SKU: LAJ-012 |
Plugs directly into the bottom of a LabJack U6 or UE9 to give screw terminal access to extra IO signals. Read more…
| Digital Temperature/Humidity Probe | SKU: LAJ-005 |
Two calibrated microsensors with serial digital output, which results in superior signal quality, a fast response time and insensitivity to external disturbances. Operating temperature range of -40 °C to 120 °C Read more…
| Dual Gain Instrumentation Amplifier | SKU: LAJ-004 |
Selectable digital gain at values of 1, 10, 100 and 1000. Four TTL or CMOS-compatible address lines individually selects the amplifier gains. Read more…
| EB37 - LabJack Experiment Board | SKU: LAJ-013 |
Connects to the LabJack UE9's DB37 connector, providing convenient screw terminal access. Also provided is a solderless breaboard and useful power supplies. Read more…
| LabJack Thermocouple Multiplexer | SKU: KTA-260K |
The KTA-260 series of devices has been created to easily allow a LabJack UD (U3/U6/UE9) data acquisition unit to read temperatures from multiple thermocouples. Read more…
| LJDac - Digital to Analog Converter (LJDAC) | SKU: LAJ-035 |
LJDAC is an analog output expansion module that provides a pair of 14-bit analog outputs with a range of ±10 V. Read more…
| LJTick-CurrentShunt | SKU: LAJ-034 |
A signal conditioning module designed to convert two 4 to 20 mA current loop signals into voltage signals that vary from 0.472 to 2.360 V. Read more…
| LJTick-Divider (LJTD) | SKU: LAJ-030 |
A signal conditioning module that divides 2 single-ended unipolar channels of 0 to 10 V analog signals down to 0 to 2.5 V signals. Read more…
| LJTick-InAmp | SKU: LAJ-031 |
Plugs directly into the standard screw terminal block found on newer U3/U6/UE9. On board switch allows 5 various gain settings, one of them being custom. Read more…
| LJTick-Level Shifter | SKU: LAJ-036 |
LJTick module that will convert two ±10 V signals to 0 to 2.5 V signals for LabJack U3s, U6s and UE9s Read more…
| LJTick-Proto | SKU: LAJ-033 |
8×8 grid of holes for prototyping custom signal-conditioning ticks. Read more…
| LJTick-RelayDriver (LJTRD) | SKU: LAJ-032 |
Allows 2 digital I/O lines on a U3, U6 and UE9 to each control a relay or other moderate load. Each has a switch to ground (i.e open-collector) that can hold off up to 50 V and can sink up to 200 mA. Read more…
| Mux80 AIN Expansion Board | SKU: LAJ-017 |
80 channel analog multiplexor for U6 and UE9 Labjack data acquisition modules.
Read more…
Read more…
| PS12DC Power Switching Board | SKU: LAJ-039 |
12 channel, semiconductor switch output module designed for Labjack U3, U6 and UE9 data acquisition modules. 750 mA per channel at 5 to 28 VDC. Read more…
| Stainless Steel Temperature Probe | SKU: LAJ-006 |
High-level linear voltage output and high accuracy. Operating temperature range from 0 to +300 °F Read more…
| Temperature Probe -40 to 100 ºC | SKU: LAJ-003 |
Temperature sensor mounted in a plastic tube with a current limiting resistor. The probe is suitable for air, surface and non-corrosive liquids. Read more…
| 3ft DC-37 M/F Serial Cable | SKU: LAJ-018 |
Short, 37 pin cable suits the expansion plug on the LabJack U6, U6-Pro, UE9 and UE9-Pro. Read more…
- per page
