Home :: Signal Conditioners :: Isolated Converters :: Isolated Analog Signal Converter, Dual Output

Isolated Analog Signal Converter, Dual Output

Isolated Analog Signal Converter, Dual Output

Slim (17.5 mm wide)isolated selectable analog input signal with selectable dual analog outputs. It features on-board DIP switches that enable the user to select their preferred input/output signal.

LED indicates that the auxiliary supply is present, plus the input signal is present (approx 5% of full input range), a third LED signals that the output is present (approx 5% of full output range)

Units will be supplied unless otherwise requested at factory default of input 4 to 20 mA and outputs set to 4 to 20 mA. Changing the outputs or input via the dip switches will cause the accuracy to drift this can be rectified by using the Span and Zero potentiometers.

Specifications:

Input Signal Types:0 to 5 VDC, 0 to 10 VDC, 1 to 5 VDC, 2 to 10 VDC, 0 to 20 mA, 4 to 20 mA
Power Supply:20 to 56 VAC/DC
Accuracy: < ±-0.2% FS
Response time: <250 mSec
Output ripple: < ±0.1% FS
Output span adjust: ±10% via potentiometer
Output zero adjust: ±10% via potentiometer
Input impedance: 0 to 20 mA, 4 to 20 mA: 250 Ω
0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V: 1 MΩ
Output impedance: 0 to 20 mA, 4 to 20 mA: 520 Ω
0 to 5 VDC, 1 to 5 VDC 500 Ω
0 to 10 VDC, 2 to 10 VDC 1 KΩ
Operating temp: 0 to 60 °C
Operating humidity: 20 to 95% RH, non condensing
Temp coefficient: <100 PPM/ C
Isolation: 2KV AC for 1 min
Standards:IEC 61010 (category 3)
EMC: EN55011:2002
EN61326:2003
CE marked: Yes
RoSH compliant: Yes
Manufacturer's P/N: FOX.ISC-2-ADL

DIP Switch Setting Table:

Documentations:

Support:


SKU:  NTB-003

Out of stock - backorder allowed

Out of stock - backorder allowed

Qty. Price
(AUD ex. GST)
1 to 4 $259.00
5 to 9 $233.10 (10% off)
10+ $220.15 (15% off)

Categories