Home :: Modbus-Bacnet Products :: IO Modules Modbus TCP :: Ethernet Modbus TCP 8 Universal AI Module

Ethernet Modbus TCP 8 Universal AI Module

Ethernet Modbus TCP 8 Universal AI Module

Yotta Control A-1819 Remote Modbus module provides 8 Universal Analog Inputs.. It uses optical isolators to prevent ground loop effects and limits damages from power surges. RS-485 interface suports a Modbus RTU or ASCII protocol. A USB comm port is also available for Modbus communications and configuration.

Like most of the Yotta Control Modbus modbus, this unit can configured (with the utility linked below). A switch on the back set to INIT will force it to default communications parameters. You can then use Yotta Utility software to autodetect it and configure it. When configuration is complete set the switch to RUN.

The Yotta Control series all come with a DIN-rail and panel mount adapter. Multiple units can be stacked on top each other for high density installation.


  • Operation Voltage: 10~30VDC/24VAC
  • Communication Baud Rate: 2400~921600bps
  • Input Operating Frequency: 10HZ
  • Operation Temperature: -20 to +75 °C
  • Degree Of Protection: IP20
  • Analog inputs: 8 (16-bit)
  • Analog input Type:0/4~20mA,J,K,T,E,R,S,B Thermocouple,Thermistor
  • Input Impedance:Current: 100 Ω / Voltage : 10 MΩ
  • Input Accuracy: ±0.1%
  • Interface: ETHERNET + USB
  • Support LAN 10/100 Mbps Communication Rate
  • Channel Independent Configuration: YES
  • Sampling Rate: 10 sample/second (total)
  • CMR @ 50/60 Hz: 120 dB
  • Span Drift: ±50 ppm/°C
  • Zero Drift: ±18 μV/°C



SKU:  YTD-519

In Stock, 5 available

In Stock, {{items}} available

Qty. Price
(AUD ex. GST)
1 to 4 $249.00
5+ $224.10 (10% off)