3onedata

Converts RS-232 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 (RS-232) to male DB-9 and RJ45 (RS-422/RS-485). Screw terminal adapter included.

Converts RS-232, RS-422 or RS-485 to RS-422 and RS-485 through a 2.5 kV optical isolation barrier. Female DB-9 for RS-232 and screw terminals for all other connections.

In line, port powered RS-232 isolator. Male DE-9 to Female DE-9

Model FL485 RS-485 Surge Protector

TOD-021 FL-BNC BNC Surge Protection

TOD-022 FL45 RJ45 Ethernet Surge Protection Suitable for 10Base-T/100Base-T standard

RS-232/485/422 to fibre converter (multi-mode SC 2km).
Two converters are required to form an end-to-end link 

A power Plug is NOT included. If you require a power plug please check PLP-003 (12Vdc) OR PLP-004 (24Vdc)

Converts RS-232, RS-485 or RS-422 to a pair of single-mode fibres with ST-connectors. 20 km transmission distance. Please note 2 Fibre Converters are required to form an end to end link.

Simple, non-isolated, port-powered RS-232 to RS-485 serial converter.

Simple in line module converts RS-232 to RS-422. Draws power from the RS-232 port. Female to male DE-9 connectors with screw terminal adapter for RS-422.

Converts 10Base-T or 100Base-TX Ethernet to two SC-connector single mode fibres. 20 km transmission distance.

Converts 10Base-T or 100Base-TX Ethernet to a single SC-connector-terminated single mode fiber. 20 km transmission distance.

Simple in line module converts RS-232 to RS-422 and RS-285. Draws power from the RS-232 port. Female to male DE-9 connectors with screw terminal adapter for RS-422/RS-485.

Port-powered, opto-isolated RS-232 to RS-485 converter. DE-9 female connector on the RS-232 side, DE-9 male or screw terminals on the RS-485 side. Optical isolation protects devices from transient surges and ground loops.

Pair of small DIN rail mounting clips and screws to suit our ATO-xxx and TOD-xxx range of converters.

Converts 10Base-T or 100Base-TX Ethernet to a dual ST-connector-terminated multi mode fibre. 2 km transmission distance.

Converts RS-232, RS-485 or RS-422 to a pair of multi-mode fibres with ST connectors. 2 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts RS-232, RS-485 or RS-422 to a pair of single-mode fibres with SC connectors. 20 km transmission distance.

Converts RS-232 to a pair of multi-mode fibres with ST-connectors. 2 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts RS-232 to a pair of single-mode fibres with SC-connectors. 20 km transmission distance. Please note these converters are sold individually. Two converters are required to form an end-to-end link.

Converts 10Base-T or 100Base-TX Ethernet to a single SC-connector-terminated single mode fibre. 20 km transmission distance. DIN rail mount.

Converts USB to RS-232, RS-422 or RS-485. 2 kV optical isolation barrier between the USB and RS485/RS422. Male DB-9 for RS-232 and screw terminals for all other connections.

Converts CAN to RS-485 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. Screw terminals for all other RS485, CAN and power connections.

Converts CAN to RS-232 through a 2.0 kV optical isolation barrier. Supports CAN2.0A and CAN2.0B protocol. DB9 Female connector for RS232, screw terminals for all other CAN and power connections.