- Computer Products
- Data Acquisition
- Data Loggers
- Electrical Switches
- Electrical Terminals-Wiring
- Industrial IoT
- Large Displays
- Modbus-Bacnet-MBus Products
- Motor Drivers & Controllers
- Motors & Accessories
- Panel Meters
- PLCs & HMIs
- Power Supplies
- Relays & Relay Cards
- 1 Wire
- Capacitive Proximity
- Float Switches
- Hall Effect
- Inductive Proximity
- Length & Distance
- Light & Colour
- Limit & Foot Switches
- Liquid Level
- Load Cells
- PhotoElectric Switches
- Pressure Transducers
- Smartphone Based
- Temperature RTD and T/C
- Temperature Other
- Temperature & Humidity
- VOC - Air Quality
- Signal Conditioners
- Test Equipment
33 products found
SKU: DIP-002In stock (3 items available)
10 Turn 10K Potentiometer
SKU: DIP-001In stock (19 items available)
10 Turn 5K Potentiometer
SKU: KTD-326Stock built to order
Dual 120 Ohm, 5%, 1W resistors for RS-485 bus termination or general purpose use
SKU: KTD-312Stock built to order
Dual 1K Ohm, 5%, 1W resistors for adapting 12V systems to Leadshine stepper motor drives
SKU: KTD-313In stock (4 items available)
Dual 2K2 Ohm, 5%, 1W resistors for adapting 24V systems to Leadshine stepper motor drives
SKU: KTD-315Stock built to order
Dual 4K7 Ohm, 5%, 1W resistors for general purpose use
SKU: KTD-327Stock built to order
470 Ohm & 330 Ohm Resistive Divider, for stepping down a 24V DC supply to 10V. Useful as a feed voltage to a potentiometer for 0-10V control for VSD, etc.
SKU: HER-056In stock (17 items available)
24VDC PCB Power Relay. Able to switch 20A
- These SPDT relays are type T90(JQX-15F)
SKU: RLY-009Available for backorder
30 A Chassis mount heavy duty relay.
SKU: KTD-311Stock built to order
Dual 500 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 2 to 10V
SKU: KTD-310Stock built to order
Dual 250 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 1 to 5V.
SKU: KTD-319Stock built to order
120 Ohm resistor and 0.1uF capacitor for back EMF suppression on AC loads
SKU: LEA-042In stock (2 items available)
698-960mhz 1710-2700mhz 2-3dbi Waterproof 4G Antenna adhesive bonding with 2m RG174 Cable and SMA male connector.
SKU: SXS-105In stock (2 items available)
BAC-IO9 is a BACnet I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x resistive inputs (up to 65kOhm). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.
SKU: DEC-105In stock (1 item available)
DVP04PT-S temperature function module allows connection of up to four 3-wire Pt100 temperature sensors to the right-side expansion port of a SS/SS2/SA/SX/SC/SV series PLC.
SKU: FMB-003In stock (9 items available)
Fema I4L is an isolated signal converter for load cell signals and millivolts. Provides +5 Vdc excitation voltage to power the load cell, and ‘sense’ function to compensate for excitation voltage variations. Accepts direct connection of 1, 2, 3 or up to 4 load cells (typical 350 Ohms load cells). We have a service to configure the I4L for you if you require it.
SKU: FMI-140Available for backorder
The B series Load Cell from Fema can measure load cell signals and is a versatile and configurable instrument. It can provide an excitation voltage of 5Vdc or 10Vdc to power up to 8 standard 350 Ohm load cells. Alarm relay and 230VAC Powered.
SKU: OHM-100In stock (1 item available)
DeltaOHM HD53LS.S is a 2-axis ultrasonic static anemometer - high sensitivity to detect very low speeds. Measurement of wind direction, wind speed, and wind gust.
Includes 5m cable. Pole is not included.
SKU: LAJ-041In stock (1 item available)
LabJack U6 USB IO module with 14 analog inputs (up to 16 bit resolution), 2 analog outputs and 20 digital IO.
SKU: FMI-050In stock (1 item available)
Load cells of 1mV/V, 2mV/V and 3 mV/V, and signal ranges up to 100mV. Provides excitation voltage configurable to +5 Vdc or +10 Vdc (max. 140mA) to power up to 8 standard 350 Ohms cells. Scalable reading from 999999 to -199999 with configurable decimal point.
SKU: NTR-215In stock (3 items available)
MOD-TC-2 Thermistor monitoring Relay is used to monitor PTC sensors embedded within motor windings. On resistance rise above 3.3 kΩ the alarm output will trip.
SKU: LEA-043In stock (1 item available)
5dbi 698-2700MHz GSM 3G 4G Antenna Waterproof Outdoor Panel. 4G LTE Aerial with SMA male connector and Magnetic Base Omnidirectional Antenna
SKU: SXS-105MIn stock (4 items available)
MOD-IO9 is a Modbus RTU I/O Module with Wall Mounting Enclosure. Ideal for remote zoning applications. 2 x resistive inputs (up to 65kOhm). 2 x volt-free digital inputs. 3 x 0..10Vdc analogue outputs. 2 x 24Vac triac outputs. 24Vac power supply.
SKU: LEA-044Available for backorder
7-8dbi 698-2700MHz GSM 3G and 4G Antenna Waterproof Outdoor Panel. 4G LTE Omnidirectional Antenna with 1.5m Cable and SMA male connector