Home :: Sensors :: Length & Distance :: JX-P420 Series Linear Position Transducer 0-20"

JX-P420 Series Linear Position Transducer 0-20"

JX-P420 Series Linear Position Transducer 0-20"

The UniMeasure JX-P420 series linear position measuring transducer is a low cost device for use in moderate duty applications in hostile wet or dry environments. The chemical resistant thermoplastic case of the transducer provides NEMA 4 (IP-65) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. The sealed case is achieved through the use of o-rings and a low friction shaft seal. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. The standard electrical connection includes a sealed bulkhead ftting and multi-conductor electrical cable. The wire rope exit direction may be specifed at time of order or may be user adjusted at time of installation.

The JX-P420 series transducer is a loop powered device with a 4 to 20 mA current output that requires a two wire connection. The transducer, power supply, and current monitor are connected in series. Zero and span adjustment potentiometers are accessible by removing two sealing screws in the rear of the transducer housing. Zero and span allow for adjustment for a full 4 to 20 mA output at between 50% and 100% of maximum linear travel.

Full part number: JX-P420-20-N11-10S-141

Download Datasheet

Support:

SKU: ADS-320

1 available

Qty. Price
(AUD ex. GST)
1+ $525.00

Categories