SE5904D Wide Temperature 4 Port RS-232/RS-422/RS-485 10/100 Mb Ethernet Serial Server
The SE5904D replaces the SE5404. Connects four RS-232, RS-422 or RS-485 serial signals to an ethernet network. 10/100 Mbps ethernet supported. Four DE-9 male serial ports. 9 to 48 VDC powered.
The SE5904D replaces the SE5404. Connects four RS-232, RS-422 or RS-485 serial signals to an ethernet network. 10/100 Mbps ethernet supported. Four DE-9 male serial ports. 9 to 48 VDC powered.
Make Serial Devices Ready to the Network
The Industrial Serial Device Server SE5904D is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5904D offers full-duplex and bi-directional data seamlessly between the four serial ports and the Ethernet network, through 2x 10/100 Ethernet ports or 2x 100/1000 SFP Fiber slots.
Advanced embedded security
SE5904D embeds OpenVPN and IPsec VPN, that allows you to tunnel your data securely through the internet and prevent unauthorized control of your Serial Devices by malicious people. The integrated Rapid Spanning Tree Protocol (RSTP), allows you to add a backup Ethernet link in the event the primary one fails.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in a rugged metal housing for wall or DIN-Rail mount with redundant 12-48 VDC wide range power input and one relay output, SE5904D is ideal for almost any industrial and manufacturing automation process. Atop Virtual COM software provides a virtual environment for applications when accessing SE5904D through TCP.
Specially Designed for Automation Fields and Harsh Environments
In industrial and manufacturing automation fields, SE5904D is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, and much more..Its design protects it from very harsh EMC and environmental conditions, making it a cost-effective choice for advanced applications.
Rugged and flexible for advanced developments
SE5904D embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. PoE versions can be powered through Power-over-Ethernet (PoE 802.3af), without additional cabling and power supply. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of Atop’s reliable SDK.
Features:
- Remotely monitor, manage, and control industrial field devices
- TCP Server/Client, UDP, Virtual COM and Tunneling modes supported
- Embedded security with PPTP, IPsec or OpenVPN client/server
- Isolated Redundant 12~48 VDC Power Inputs or powered (PoE models) through through the Ethernet cable (802.3af)
- Configuration via Web Browser/ Serial Console/ Telnet/ Windows Utility
- Rugged metal case with wall or DIN-Rail mount
Power
- Input: 9 to 48 VDC
- Consumption: Approx. 8 W
Serial
- Interface: D-Sub9 RS-232/422/485 software selectable (DB models)
- Port(s): 4 + 1 console port (RJ45)
- Baud rate: 1200 bps to 921 kbps
- Parity: None, Odd, Even, Mark, Space
- Data bits: 7, 8
- Stop bits: 1, 2
- Flow control:
- None
- Software: Xon/Xoff
- Hardware: RTS/CTS
Ethernet
- Transmission rate: 10/100Mbps Auto-detection
- Connector: RJ-45
- Compliance: IEEE802.3
- LAN Mode: Dual Subnets or Network redundancy
Link Mode
- TCP Server: 4 Connections; VirtualCOM or reverse Telnet
- TCP Client: Single destination or VirtualCOM
- UDP: Up to 4 Ranges of IPs
Software
- Configuration: Web Page / Telnet / Serial console / Windows utility
- Virtual Com: Windows and Linux port redirection software
- Support Protocol: ICMP, TCP(UDP) / IP, DHCP client, SNMP, HTTP
Environment
- Operating temperature: -40 to 80 °C (-40º to 176 ºF)
- Storage: -40 to 85 ºC (-40º to 185 ºF), 5 to 95% RH
Approval
- EMC: FCC Class A, CE Class A
Dimension
- W × H × D: 54 × 146 × 120 mm
- Download datasheet
- Software and Manuals on ATOP's website
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
