ATOP

DIN rail mount, 10/100 Mbps industrial Ethernet switch with dual redundant power inputs.

DE-9 to 5 Screw Terminal Board. Suitable for SE5001 and SE5002 for RS-422/485 connections.

Not available for backorder.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via isolated RS-422/485 interfaces with TB5 screw terminals.

Not available for backorder.

AW5500 is an industrial, extremely flexible and cost-effective wireless device that supports access point (AP), Bridge, Wireless Distribution System (WDS) and Client modes of operation. It also supports IEEE 802.11 a/b/g/n using either the 2.4GHz or 5GHz frequency bands - for maximum compatibility with other Wi-Fi devices and lightning fast data-rates. It has 9 to 48 VDC powered and 5.85 W power consumption.

Not available for backorder - new product is ATO-201A

SW5501 is an industrial serial device server that enables any device with 1 serial port (RS-232/422/485) to communicate wirelessly over an IEEE 802.11 a/b/g/n network. Packed in an IP50 rugged metal housing with DIN rail mountable case. It is 9 to 48 VDC powered and has 4.5 W power consumption.

EGH2308 is an 8 port unmanaged ethernet switch that has gigabit uplinks. The device has IP50 rated metal enclosure. 9 to 48 VDC powered.

Converts RS-232, RS-485 or RS-422 to a pair of multi-mode fiber with SC connectors. It supports Multi-mode 2 Km.

Connects an RS-232, RS-422 or RS-485 serial signal to an ethernet network. 10/100 Mbps ethernet supported. 4-Pin D-code Female M12 connection. 9-48 VDC powered.

DIN rail mount, 10/100 Mbps industrial ethernet switch with dual redundant power inputs.

The SE5904D replaces the SE5404. Connects four RS-232, RS-422 or RS-485 serial signals to an ethernet network. 10/100 Mbps ethernet supported. Four DE-9 male serial ports. 9 to 48 VDC powered.

MW5501C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP through wired and wireless Ethernet Networks.

MW5502C Industrial Wireless Modbus Gateway will provide you a flexible platform to convert bi-directionally Modbus RTU/ASCII/TCP through wired and wireless Ethernet Networks.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces. It is fitted with Terminal block not D9 connector.

MB5202TB from Atop (Taiwan) is a 2 port Modbus TCP to Modbus ASCII/RTU converter gateway which allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces. It is fitted with Terminal blocks.

Unmanaged Fast Ethernet Switch, 5-Port Slim-Type 10/100/1000 Mbps industrial Ethernet switch with dual redundant power inputs and DIN Rail Mount.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

Modbus TCP to Modbus ASCII/RTU converter gateway allows Modbus TCP masters to communicate with serial Modbus slave devices via RS-232/RS-485/RS-485 interfaces.

Unmanaged Fast Ethernet Switch, 5-Port Slim-Type 10/100/1000 Mbps industrial Ethernet switch with dual redundant power inputs and DIN Rail Mount (Higher Operating Temperature Range compare to EHG3005).

1. Industrial Communication mode combines advanced features such as Flash Roaming, PROFINET Transparent, and VLAN Tagging
2. Engineered for Extreme Condition(-30°C to 70C) with Advanced EMC Design
3. Versatile Operating Modes for Tailored Connectivity (WDS Bridge and AP Client)
4. Seamless Wi-Fi Connectivity with Sub-30ms Flash Roaming
5. Standard Wi-Fi Roaming(802.11r) with Sub-100ms Roaming Time*
6. PROFINET Transparent Mode for Addressing NAT & PROFINET
   Deployment