Analog Isolated Transmitter 0 to 10VDC In, 4 to 20 mA Out
Analog Isolated Transmitter 0 to 10VDC In, 4 to 20 mA Out with a configurable display of the value.
No available for backorder
The AXB-052 is a 0 to 10 VDC input, 4 to 20 mA output isolated transmitter. It features 3 way 2 kV isolation (input / output 1 / supply), a 24 VDC Excitation Voltage to power sensors and a 5 digit programmable display. The display can be programmed to show the 4 to 20 mA signal in engineering units. The display allows technicians to easily view the input signal and determine if a fault has occurred.
Features:
- Mounts onto DIN rail
- High stability
Power supply: 18 to 60 VAC/DC
Output: 4 to 20 mA
Measuring Accuracy: 0.1% Full scale
Display: 5 digit, 6.8 mm tall red LED
Display range: -19999 to 99999 with adjustable decimal point
Sampling time: 16 cycles/sec
Analog output resolution:Â 16 bit
Isolation: Input / Output 1 / supply
Memory mode: Non-volatile E²PROM memory
Parameter setting: Touch switches
Output drive capability (maximum): 10 V or 500 Ω
Output ripple: <0.1 F.S.
Alarm output relay:Â 1
RS-485 address: "01" to "FF" (0 to 255)Â
RS-485 baud rate: 19200 / 9600 / 4800 / 2400 selective
RS-485 protocol: Modbus RTU mode
Temperature coefficient: 50ppm/°C (0 to 50°C)
Operating condition: 0 to 60°C (20 to 90% RH non-condensed)Â
Storage condition: 0 to 70°C (20 to 90% RH non-condensed)Â
CE EMC Certification:Â
- EN 55022:1998/A1:2000 Class A
- EN 61000-3-2:2000
- EN 61000-3-3:1995/A1:2001
- EN 55024:1998/A1:2001
Dimension: 23 (W) × 76 (H) × 96 (D) mm
We carry a selection of the full range of options listed in the datasheet. Non-stocked configurations may be available but may be subject to minimum order quantities or different pricing. Contact us for more information
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.