CNC Accessories

IDC26-DSUB25 Female Ribbon Cable used to connect CNCDrive's Motion Controllers to Parallel Port Breakout Board. Cable length is 250mm. 

IDC26 Male - IDC26 Male Ribbon Cable used to connect CNCDrive's Motion Controllers to Parallel Port Breakout Board. Cable length is 250mm. 

Directly replaces the traditional Parallel port with modern USB. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 100kHz step frequency operation, Fast communication with data buffer for robust and stabile operation. 

***Mini USB cable not included - can be purchased here: USB-003. 

Dual Port Breakout Board for 2 Parallel Ports or 2 ports on a compatible motion controller. One port has standard Parallel Port pinout while the second has pinout of an input type Parallel Port. The board has 18 digital inputs and 16 digital outputs. All I/Os are optically isolated with fast 10Mbit/sec speed optocouplers. The outputs are capable of driving 1A at 24VDC. The inputs can be used with external switches and sensors.

The UCBB breakout board is compatible with the UC300ETH-5LPT motion controller. It is not compatible with the UC400ETH controller. 

Machine control software compatible with all CNCDrive's motion controller. It can control up to 6 axes. Modern alternative to Mach 3 and Mach 4. 

Note: each UCCNC license requires a UCCNC motion controller. The license key is tied to the serial number of the motion controller and are not tied to the control computer in anyway - therefore it can be installed on multiple computer as long as they use the same motion controller.  

Wireless jog pendant designed to be used with Mach3 or UCCNC software. Has Large LCD screen with backlight and can display up to 6 axes on screen. 10-15 meters transmit range using radio. 

Single Port Breakout Board compatible with traditional Parallel Port. The board has 12 outputs and 5 inputs. All I/Os are optically isolated with 10Mbit/s max speed.