CNC Controllers

Combine Ethernet Motion Controller and Breakout Board in a single module. Can control up to 6-axes with Mach3, Mach4 or UCCNC software with onboard I/Os. Up to 400kHz step frequency. The controller can be connected to an additional Breakout Board to extend the number of I/Os. 

Note: The AXBB-E requires 2x power supplies - 1x 5VDC and 1x 12-24VDC. 

Parallel Port Interface card with Relays and Safety Charge Pump Option. 12 to 24VDC power

Provides step and direction signals to two stepper drivers using onboard buttons or external switches

Provides step and direction signals to two stepper drivers using onboard buttons or external switches.

Directly replaces and expands traditional Parallel Port with Ethernet interface. Can control up to 6 axis simultaneously with Mach3, Mach4 or UCCNC software. It has 49 digital inputs, 36 digital outputs, 2 analog inputs and 2 analog outputs. Can connect directly with a control computer or via routers/switches.

Directly replaces the traditional Parallel port with Ethernet. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 400kHz step frequency operation. Fast communication with data buffer for robust and stable operation. 

Four axis stepper motor controller fitted with USB and RS-485 ports. Takes simple serial commands and produces ramped frequency profiles for stepper or servo motor control. 

New Version: Now with analog inputs and can be powered from 8 to 35 VDC.

Four axis stepper motor controller fitted with USB and RS-485 ports. Takes simple serial commands and produces ramped frequency profiles for stepper or servo motor control. DIN rail mount version.

New Version: Now with analog inputs and can be powered from 8 to 35 VDC.