‍Clearance

Tiny signal conditioner for 1 mV/V load cells. Provides 5 V excitation. 3-wire 0 to 10 V output.

No available for backorder

Tiny signal conditioner for 1 mV/V load cells. Provides 5 V excitation. 3-wire 4 to 20 mA output.

No available for backorder

10 Turn 5K Potentiometer
LAST UNITS!

Tiny signal conditioner for 3 mV/V load cells. Provides 5 V excitation. 3-wirAe 0 to 10 V output.

No available for backorder

Tiny signal conditioner for 3 mV/V load cells. Provides 5 V excitation. 3-wire 0 to 5 V output.

No available for backorder

5 Digit Process Indicator(24X48mm) 4-20mA Input, 24VAC Powered.

Not available for backorder

5 Digit dual input math function isolated transmitter with two 0-10 V inputs and 0-10 V output. Functions available: A + B, A - B, A × B, A ÷ B, |A|, √A, and re-transmission of highest or lowest input signal.

No available for backorder

Wireless multi-function gateway that enables a Modbus RTU slave network to be monitored by more than one master. Its GSM/GPRS interface allows it to connect to a cloud based gateway. Mini USB/RS-485 interfaces. 10 to 35 VDC powered

NOT AVAILABLE FOR BACKORDER

Analog Isolated Transmitter 0 to 10VDC In, 4 to 20 mA Out with a configurable display of the value.

No available for backorder

Analog Isolated Transmitter 4 to 20 mA In, 4 to 20 mA Out with a configurable display of the value.

No available for backorder

Single shaft NEMA 17 frame size bipolar stepper motor with 2.6 kg·cm holding torque.

LAST UNITS

Dual shaft NEMA 17 frame size bipolar stepper motor with 3.6 kg·cm holding torque.

LAST UNITS. Replaced by MOT-120L

CDR-AL-LCD-RH-2DO sensors and alarm units are designed to detect carbon dioxide concentration, humidity, temperature in the room spaces and provide alarm indication on high level of CO2 (green, amber and red LED). 

CDRC sensors are designed to detect carbon dioxide concentration and relative humidity and temperature in the room spaces and have 4 to 20 mA outputs

NOT AVAILABLE FOR BACKORDER

CDRC sensors are designed to detect carbon dioxide concentration and temperature in the room spaces and have 4 to 20 mA outputs

NOT AVAILABLE FOR BACKORDER

CDR-AL sensors and alarm units are designed to detect carbon dioxide concentration, temperature in the room spaces and provide alarm indication on high level of CO2 (green, amber and red LED).

NOT AVAILABLE FOR BACKORDER 

CDR-AL-LCD sensors and alarm units are designed to detect carbon dioxide concentration, temperature in the room spaces and provide alarm indication on high level of CO2 (green, amber and red LED).

NOT AVAILABLE FOR BACKORDER

D-SER is used with the BACnet and Modbus Plant Sensors to Configure the devices e.g. setting up the Modbus slave address or BACnet MAC Address. D-Ser is also used to adjust the calibration settings.

NOT AVAILABLE FOR BACKORDER

Converts between slave devices on a Modbus RTU network and a Profibus DP master.

NOT AVAILABLE FOR BACKORDER

A simple to use and feature packed digital weekly and yearly timer.

DCBox DPS series differential pressure transmitter -100 to 100 Pa. Two-wire, loop powered 4 to 20 mA output. We ordered too many of this model so they are on special

DIN rail mount battery monitor and test unit for 24 V systems. Sits between the battery and charger / load and provides contacts for DC bus good, battery fail and battery low signals out. On Special the DR-UPS40 is now being replaced by newer models DUPS20 and DUPS40

DS18B20 Temperature Sensor with copper screw clip probe and a 3 metre cable. Connector is an option

DS18B20 Temperature Sensor with Waterprrof Plastic ABS 6x30mm probe 3 metre cable