DCBox

Mini Size 0-5A AC RMS Current to 4-20mA Transmitter

Tiny signal conditioner for potentiometers. Provides 2.5 V excitation. 3-wire 0 to 10 V output.

Tiny signal conditioner for potentiometers. Provides 2.5 V excitation. 3-wire 4 to 20 mA output.

IP67 rated, mini square type inductive proximity sensors that uses its upper surface to detect objects and has a sensing distance of ~ 0 to 1.5 mm. It features: NPN output type with NO contact, plus PVC ~2 meter cable.

Paddle Wheel Flow Controller Meter with 2 Alarm Relays and 4-20mA output

Paddle Wheel Flow Controller Meter with 2 Alarm Relays and totaliser pulse output

Paddle Wheel Flow Sensor with a measuring flow rate range of 0.1 to 8 m/s

Inline paddle wheel flow sensor for low-viscosity liquids (water etc.) from 12 to 25 liters per minute.

Inline paddle wheel flow sensor for low-viscosity liquids (water etc.) from 4.5 to 12 liters per minute.

Photo Interrupter Switch UT-06N-R

Potentiometer 5 Digit Micro-Process Meter 22 to 60VDC Powered

Potentiometer 5 Digit Micro-Process Meter with Analog Retransmission Output. 22 to 60VDC Powered

DIN Rail mount programmable isolated 100 Ω to 100 KΩ potentiometer transmitter to a seletable output range of 4 to 20 mA, 0 to 5 VDC, 0 to 10 VDC with 18 to 60 VAC/VDC auxiliary.

Programmable Trip Alarm Controller 4 to 20 mA In, 2 Relay Output with a configurable display of the value. Power 18~60VDC.

A budget priced 4 Digit Process Indicator(48 x 96 mm) with a selectable PT100/Thermocouple Input, Alarm relay output and 24 VDC Powered.

Flow Rate/Totalizer/Batch Controller (two-stage)Meter with NPN/PNP Pulse or 4-20 mA Analog Input. 24 VDC powered

Retro reflective, right angle mounted, photoelectric sensor that has a 3 m detecting distance. Comes with ~2 m, 4-wire PVC cable. NPN output and 12 to 24 VDC powered.

This 5 Digit Dual Process Modbus RS-485 Indicator (48x96mm) makes it easy to display 2 values from your PLC or RTU.

This 5 Digit Process RS-485 Indicator (48x96mm) acts as a Modbus RTU slave making it easy to display values from your PLC or RTU. DC 22~50V powered.

S Type Load Cell 0-100Kg range with 2mV/V output

S Type Load Cell 0-25 Kg range with 2 mV/V output

S Type Load Cell 0-500Kg range with 2mV/V output

S Type Load Cell 0-50Kg range with 2mV/V output

5 Digit LCD programmable process indicator with internal battery and 0 to 10 VDC signal input. Suits cutout 24 × 48 mm.