DVP-28SV11T Programmable Logic Controller

DVP-28SV11T Programmable Logic Controller

SKU: DEC-026

DVP-28SV11T PLC with 16 digital inputs and 12 transistor outputs. Compatible with DVP-S and DVP-SL Series expansion modules. 24 VDC powered.

  • Manufacturer: DELTA
Buy more for less:
1-4items$518.79/ each 
5-9items$466.91/ eachsave10%
10or more items$440.97/ eachsave15%
  • $518.78
Qty:  
In stock(3 items available)

The DVP-SV Series is a highly expandable series industrial PLCs. The DVP-28SV11T has expansion ports on both sides. Expansion modules can be mounted on the left (high speed expansion) or right (low speed general purpose modules) of the PLC without external wiring.

The unit features a rich command set with PID loops for process control, linear / arc interpolation commands and high speed counters. Two small potentiometers on the front of the unit can be read as analog inputs with 8-bit resolution.

The programming software runs on Windows and is freely available for download.

Note 1: Each bank of digital inputs can be wired so all inputs in the bank are NPN or all are PNP type inputs.

Applications:

2-axis servo positioning control, material cutting machine (high-speed servo control), main hoist of crane, material clip controlled by servo, equipments in the optoelectronics industry, semiconductor industry, textile industry, energy saving activities and automation in buildings.

Resources:

Programming Service:

Do you have an application for one of our PLCs but don't know how to program in Ladder Logic? We can program it for you. Email us your requirements and we will provide a quote to do the programming.

The DVP-SV Series is a highly expandable series industrial PLCs. The DVP-28SV11T has expansion ports on both sides. Expansion modules can be mounted on the left (high speed expansion) or right (low speed general purpose modules) of the PLC without external wiring.

The unit features a rich command set with PID loops for process control, linear / arc interpolation commands and high speed counters. Two small potentiometers on the front of the unit can be read as analog inputs with 8-bit resolution.

The programming software runs on Windows and is freely available for download.

Note 1: Each bank of digital inputs can be wired so all inputs in the bank are NPN or all are PNP type inputs.

Applications:

2-axis servo positioning control, material cutting machine (high-speed servo control), main hoist of crane, material clip controlled by servo, equipments in the optoelectronics industry, semiconductor industry, textile industry, energy saving activities and automation in buildings.

Resources:

Programming Service:

Do you have an application for one of our PLCs but don't know how to program in Ladder Logic? We can program it for you. Email us your requirements and we will provide a quote to do the programming.

Specifications:

Power:20.4 to 28.8 VDC
Digital Inputs:2 banks of 8 inputs, 24 VDC sink or source¹
Digital Outputs:12 NPN Open collector outputs with shared commons
Output Rating:0.3 A each point
Communication Port:RS-232 and RS-485, Modbus ASCII/RTU master or slave
Program Capacity:16k steps
Execution Speed:0.24 µs per basic instruction
IO Points:Up to 512 via expansion modules
High Speed Counters:4 counters, 200 kHz
    • SKU
      DEC-026
    • Weight
      0.35 kg
    • Dimensions (L x W x H)
      10 x 8 x 10 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products