United States en USD
  •  
     
Fema EC4-ZR3 Fully Equipped Process Indicator 18-265Vac/Vdc
  • Fema EC4-ZR3 Fully Equipped Process Indicator 18-265Vac/Vdc
  • Fema EC4-ZR3 Fully Equipped Process Indicator 18-265Vac/Vdc

Fema EC4-ZR3 Fully Equipped Process Indicator 18-265Vac/Vdc

SKU: FMI-030

Four digit universal process indicator accepts thermocouples, RTD's, Thermistors, AC (600VAC and 5AAC) , DC (600VDC and 5ADC) and Frequency. 4 Relays and Analog output. 18 to 265 Vac/dc Powered.

Fema
  • Manufacturer: Fema
Buy more for less:
1-4items$230.94/ each 
5-9items$207.84/ eachsave10%
10or more items$196.30/ eachsave15%
  • $230.94
Qty:  
In stock(5 items available)

Fema Electronica EZ4-ZR3 is a multisignal digital panel meter with 4 relays and analog output. Configurable to read AC and DC voltages (up to 600 V), AC and DC amperes (up to 5 A), process signals (mA and Vdc) with and without excitation voltage, thermocouples K, J, E, N, L, R, S, B, T and C, temperature probes Pt100 with 2 and 3 wires, Pt500, Pt1000, Ni100, Ni200, Ni1000, PTC and NTC, resistances, potentiometers and frequency. AC measures in True RMS. 

Standard 96 x 48 mm (1/8 DIN) size. Scalable reading with 4 digits (9999 to -1999) and configurable decimal point. ‘Fast access’ function to alarm setpoints, external contact for special functions, ‘Eco’ mode for reduced consumption, 5 brightness levels. Single universal power supply 18 to 265 Vac/dc. Includes 4 relays SPST and 1 analog output 4/20 mA isolated . 

Features:

  • Accepts AC voltages (from mVac up to 600Vac) signals
  • Accepts AC currents (up to 5Aac) signals
  • AC measurements in True RMS
  • Accepts DC voltages (up to 600Vdc) signals
  • Accepts DC currents (up to 5Adc) signals
  • Accepts frequency signals up to 100Hz for AC power lines
  • Accepts process signals (mA and Vdc) signals
  • Accepts thermocouples (K, J, E, N, L, R, S, B, T and C) signals
  • Accepts resistive temperature probes (Pt100, Pt500, Pt1000, Ni100, Ni200, Ni1000, PTC and NTC) signals
  • Accepts potentiometer signals
  • Adjustable digital filter.
  • Accepts front panel input of custom created non-linear curve with up to 20 points
  • Key panel protection through password to avoid tampering.
  • Alarms triggered above set point, below set point within range, out of range and sensor break detection.
  • Hold capability and peak and valley detection.
  • Tare function via front panel or via digital input.
  • Circuitry can be removed from housing without disconnecting wires.
    • SKU
      FMI-030
    • Weight
      0.35 kg
    • Dimensions (L x W x H)
      13 x 10 x 7 cm

Manufacturer Part No: Fema Electronica EC4-ZR3 

Power supply: 18 to 265 Vac/dc (isolated 1500 Veff @60 seconds)

Maximum power consumption: 2.5 VA

Digits: 4

Reading: 9999 / -1999

Decimal point:  configurable

Led color: red

Digit height: 14 mm

Accepted signal ranges:
    • AC voltages and AC currents ~600 Vac, ~200 Vac, ~20 Vac, ~2 Vac
    ~200 mVac, ~60 mVac, ~5 Aac, ~20 mAac
    (True RMS measure)
    (accepts phase-neutral and phase-phase measure)
    (frequency up to 150 Hz)
    • DC voltages and DC currents ±600 Vdc, ±200 Vdc, ±20 Vdc, ±2 Vdc
    ±200 mVdc, ±60 mVdc, ±5 Adc, ±20 mAdc
    • thermocouples K, J, E, N, L, R, S, B, T and C
    (automatic cold junction compensation)
    • resistive ‘Pt’ probes Pt100 with 2 and 3 wires, Pt500, Pt1000
    • resistive ‘Ni’ probes Ni100, Ni200, Ni1000
    • resistive NTC probes see table at page 3
    • resistive PTC probes families KTY-121, KTY-210 and KTY-220
    • process 4/20 mA, 0/10 Vdc
    (+15 Vdc excitation voltage configurable at terminal 5)
    • frequency up to 100 Hz (minimum 15 Hz). Vac and Aac ranges.
    • resistances ranges 0/5 K and 0/50 K
    • potentiometers with nominal values from 500 R up to 20 K

Thermal drift offset+span 150 ppm/ºC

Readings 3 readings / second

Refresh 3 refresh / second

Response time

Operating temperature: 0 to 55 °C 

Operating humidity: 20 to 95%RH Non-condensing

Weight: 150 g

Dimension: 96 x 48 x 91 mm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought