Through Beam Photoelectric Detector
Through-beam Photoelectric Detector consisting of a transmitter and receiver. Alarm output has normally open and normally closed contact, up to 12 m detection distance.
This through beam photo-electric sensor can be used to detect presence of a person entering a premises by using a light transmitter, infrared in this case, and a photoelectric receiver.
The beam's arrangement consists of a receiver located within the line-of-sight of the transmitter. When an object is detected the light beam from the transmitter is blocked from getting to the receiver, resulting in an alarm signal being sent to the alarm system.
Power supply: 12 to 24 VAC/DC or 2 x 1.5 VGN 15A Battery
Working current: Emitter < 8mA , Receiver < 40mA
Detection distance: 12 m
Photocell wavelength: 940nm
Alarm output-normal: NC & NO contact rated to 30 VDC @1A
Temperature: -20 to 60°C
IP rating: IP54
Size: 127 x 50 x 28 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
