Isolated Converters

5 Digit dual input math function isolated transmitter with two 0-10 V inputs and 0-10 V output. Functions available: A + B, A - B, A × B, A ÷ B, |A|, √A, and re-transmission of highest or lowest input signal.

5 Digit dual input math function isolated transmitter with two 4-20 mA inputs and 4-20 mA output. Functions available: A + B, A - B, A × B, A ÷ B, |A|, √A, and re-transmission of highest or lowest input signal.

Analog Isolated Transmitter 0 to 10VDC In, 4 to 20 mA Out with a configurable display of the value.

Analog Isolated Transmitter 0 to 20VDC In, 0 to 10 VDC Out, an alarm output and a configurable display of the value.

Analog Isolated Transmitter 0 to 5VDC In, 0 to 10 VDC Out, an alarm output and a configurable display of the value.

Analog Isolated Transmitter 4 to 20 mA In, 0 to 10VDC Out with a configurable display of the value.

DIN rail mount current transducer presents a 4 to 20 mA DC signal representing the AC current flowing through a primary conductor. 0 to 8 A primary AC current range. 

This is an NPN frequency input to 4-20mA output isolated converter. 0-5V(TTL), PNP 12V input can be selected by jumper.

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

Isolated K-type thermocouple transmitter with 4 to 20 mA output and programmable display

The NTP4 is a universal temperature transmitter in a 6-mm wide slimline DIN rail mounting enclosure. The device is intended for the conversion of the measurement signal from a TC or a 2-, 3-, or 4-wire RTD into a 4-20 mA or 0(2)-10 V standard signal.

DIN Rail mount programmable isolated 100 Ω to 100 KΩ potentiometer transmitter to a seletable output range of 4 to 20 mA, 0 to 5 VDC, 0 to 10 VDC with 18 to 60 VAC/VDC auxiliary.

Analog isolated transmitter, 0 to 5 AAC in, 0 to 10 VDC out.

Converts a 0 to 30 VDC signal to a 4 to 20 mA one with 1.5 kV isolation. Great for monitoring battery voltages etc.

Takes a 0 to 5A AC current in (such as that from a current transformer) and gives a fully isolated 4 to 20 mA DC signal out representing the approximated RMS value of the signal. DIN rail mount, 18 to 60 V powered.

Converts a 0 to 60 VDC signal to a 4 to 20 mA one with 1.5 kV isolation. Great for monitoring battery voltages etc.

Analog Isolated Transmitter 500-10KOhm Potentiometer In, 4 to 20 mA Out.  

Head mount signal conditioner for converting RTDs, thermocouples and voltage signals into a 4-20 mA current with a superimposed HART protocol for digital communication.

Fully isolated, head-mount 4 to 20 mA temperature transmitter with programmable input and USB port for easy configuration.

DIN-rail mount signal conditioner for converting RTDs, thermocouples and voltage signals into a 4-20 mA current with a superimposed HART protocol for digital communication.

Temperature Transmitter for converting RTDs, thermocouples and NTC into a 4-20 mA current with a superimposed HART protocol for digital communication.

Configuration interface for TXIsoRail-HART and TxIsoPack-HART temperature transmitters

Txconfig USB programming cable with DIN43650 interface for configuring Novus NP620 pressure sensors.