Isolated Converters

The TxConfig USB is the configuration interface to configure the whole NOVUS Smart Transmitters family such as TxRail, TxIsoRail, RHT sensors 

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV or 0 to 10 V in and outputs 4 to 20 mA. Programmable zero and span. Loop powered.

Fully isolated DIN rail mount signal conditioner takes thermocouples, Pt100 sensors, 0 to 50 mV, 0 to 20 mA or 4 to 20 mA in and outputs 0 to 10 V. Programmable zero and span.

DIN-rail mount signal conditioner for converting RTDs, thermocouples and voltage signals into a 4-20 mA current with a superimposed HART protocol for digital communication.

Head mount signal conditioner for converting RTDs, thermocouples and voltage signals into a 4-20 mA current with a superimposed HART protocol for digital communication.

Fully isolated, head-mount 4 to 20 mA temperature transmitter with programmable input and USB port for easy configuration.

Configuration interface for TXIsoRail-HART and TxIsoPack-HART temperature transmitters

Isolated K-type thermocouple transmitter with 4 to 20 mA output and programmable display

Analog Isolated Transmitter 4 to 20 mA In, 0 to 10VDC Out with a configurable display of the value.

Analog Isolated Transmitter 0 to 10VDC In, 4 to 20 mA Out with a configurable display of the value.

Analog Isolated Transmitter 500-10KOhm Potentiometer In, 4 to 20 mA Out.  

Takes a 0 to 5A AC current in (such as that from a current transformer) and gives a fully isolated 4 to 20 mA DC signal out representing the approximated RMS value of the signal. DIN rail mount, 18 to 60 V powered.

Analog isolated transmitter, 0 to 5 AAC in, 0 to 10 VDC out.

Converts a 0 to 30 VDC signal to a 4 to 20 mA one with 1.5 kV isolation. Great for monitoring battery voltages etc.

Converts a 0 to 60 VDC signal to a 4 to 20 mA one with 1.5 kV isolation. Great for monitoring battery voltages etc.

Ultra Slim Analog Isolated Transmitter 4 to 20 mA In, selectable current or voltage output. DIP switch allows selection of different outputs 0-5V, 0-10V, 0-20mA or 4-20mA

Ultra Slim Analog Isolated Transmitter -10 to +10V In, selectable current or voltage output. DIP switch allows selection of different outputs 0-5V, 0-10V, 0-20mA or 4-20mA

DIN Rail mount programmable isolated 100 Ω to 100 KΩ potentiometer transmitter to a seletable output range of 4 to 20 mA, 0 to 5 VDC, 0 to 10 VDC with 18 to 60 VAC/VDC auxiliary.

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

This is an NPN frequency input to 4-20mA output isolated converter. 0-5V(TTL), PNP 12V input can be selected by jumper.

Slim Type 0-10V to 4-20mA Isolated Converter

5 Digit dual input math function isolated transmitter with two 4-20 mA inputs and 4-20 mA output. Functions available: A + B, A - B, A × B, A ÷ B, |A|, √A, and re-transmission of highest or lowest input signal.

5 Digit dual input math function isolated transmitter with two 0-10 V inputs and 0-10 V output. Functions available: A + B, A - B, A × B, A ÷ B, |A|, √A, and re-transmission of highest or lowest input signal.