KTA-282 Modbus TCP Weather Station Gateway

KTA-282 Modbus TCP Weather Station Gateway

SKU: KTA-282

Interfaces a Davis Instruments Weather Station to a Modbus TCP/IP or RTU network

Ocean Controls
  • Manufacturer: Ocean Controls
Buy more for less:
1-4items$173.96/ each 
5-9items$156.57/ eachsave10%
10or more items$147.87/ eachsave15%
  • $173.96
Qty:  
Available for backorder

The KTA-282 gateway allows you to easily connect your PLC (Programmable Logic Controller), RTU (Remote Telemetry Unit) or SCADA (Supervisory Control And Data Aquisition) System to one of the following Davis weather stations:

The gateway plugs into the weather station's console using the Davis WeatherLink cable (Weather Link for Vantage Pro Serial) and appears on the Modbus network as a Modbus TCP/IP or RTU slave. This allows your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature, etc.

Typical Setup:

KTA-282_setup.png
  • Power Supply: 8 to 28V DC
  • Power Consumption: 100mW
  • Operating Temperature: 0 to 70°C
  • 2 x Open Collector Outputs: for alarms or control
  • Protocol: Modbus TCP/IP network via Ethernet. Can be polled by up to three Modbus masters simultaneously. Also supports Modbus RTU over RS-485.
  • Provides a webpage whereby TCP/IP settings can be easily configured. Also shows current settings, weather data, and communications statuses
  • Supports the new LOOP 2 command. This provides an additional 16 packets of previously unavailable weather data.
  • Can directly write the internal memory of the weather station, allowing configuration values to be changed (commonly latitude, longitude, elevation, timezone, etc)
  • Allows interrogation over HTTP to return any Modbus register values in XML format. Make your own custom application using the weather data
  • Can be screwed to a panel, or mounted to DIN rail.
  • Dimensions: 115L × 90W × 40H (mm)
    • SKU
      KTA-282
    • Weight
      0.15 kg
    • Dimensions (L x W x H)
      11 x 9 x 4 cm

Documents: 

Software: 

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought