Home :: Prototyping :: Distance Sensors :: MB7387 HRXL-MaxSonar-WRCT Compact Ultrasonic Rangefinder

MB7387 HRXL-MaxSonar-WRCT Compact Ultrasonic Rangefinder

MB7387 HRXL-MaxSonar-WRCT Compact Ultrasonic Rangefinder

The HRXL series of ultrasonic rangefinders from MaxBotix give analog voltage, pulse width and serial data measurements of the distance from the sensor to an object or surface.

We've been impressed with the improvement in stability and object identifiction of these sensors over previous versions. Compared to the LV and XL series sensors, the HRXL series features 1 mm resolution, automatic temperature compensation, automatic target size compensation, simultaneous multiple sensors operation and better noise reduction algorithms.

The automatic temperature compensation adjusts the ranging to account for the changing speed of sound in air, enabling the 1 mm resolution of these sensors.

Most low cost ultrasonic rangefinders will report the range to smaller size targets as farther than the actual distance. In addition, they may also report the range to larger size targets as closer than the actual distance. These sensors have automatic target size compensation which greatly reduces this effect.

This series is MaxBotix's most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications. The robust PVC housing is designed to meet IP67 water intrusion standards. These compact sensors fit in tight spaces, but have slightly less accuracy than our narrow beamwidth version.

The sensor features three signal outputs, all of which work at the same time. It gives a voltage from 0% to about 100% of the supply voltage depending on the range of the target. (The actual scale factor is Vcc/5120 per 1 mm.)

The pulse pin outputs a pulse width representation of the distance with a scale factor of 1 µS per mm. Output range is 300 µs for 300 mm to 5000 µs for 5000 mm.

The serial output is TTL compatible (see also the RS-232 version of the same sensor) and reports the range in millimetres as a decimal number.

Features:

  • Range 0 to 5 metres
  • Resolution of 1 mm
  • 7.5 Hz read rate
  • Internal temperature compensation
  • 42 kHz ultrasonic sensor measures distance to objects
  • RoHS Compliant
  • Read from all 3 sensor outputs: Analog Voltage, Serial, Pulse Width
  • Virtually no sensor dead zone, objects closer than 30 cm range as 30 cm
  • Operates from 2.7 to 5.5 VDC
  • Low 2.9 mA average current requirement
  • Small, light weight module
  • Designed for easy integration into your project or product
  • Operational temperature -40 to 65 °C (-40 to 149 °F)
  • Realtime automatic calibration (voltage, humidity, and ambient noise)
  • Firmware filtering for excellent noise tolerance and clutter rejection
  • Weather resistant (IP67)
  • Matches standard electrical 3/4 inch PVC pipe fittings for easy mounting (3/4 inch National Pipe Thread Straight)
  • TTL serial output

Documents:

Support:


SKU:  MXS-104

3 available

3 available

Qty. Price
(AUD ex. GST)
1 to 4 $149.95
5+ $134.96 (10% off)

Categories