CS-D1008 8A 2 Phase CS Series Closed Loop Stepper Drive

CS-D1008 8A 2 Phase CS Series Closed Loop Stepper Drive

SKU: SMC-165

Leadshine CS-D1008 is a stepper motor driver with encoder feedback input. Operating at 30-80VDC, max 8A output current. Suits 2 phase CS Series Closed Loop stepper motors of NEMA 23, 24, 34, and 42.

Leadshine
  • Manufacturer: Leadshine
Buy more for less:
1-4items$119.44/ each 
5-9items$107.50/ eachsave10%
10or more items$101.52/ eachsave15%
  • $119.44
Qty:  
In stock(2 items available)

Leadshine CS-D1008 is a closed loop stepper drive. When used to drive a 2-phase stepper motor in frame sizes NEMA 23, 24, 34 or 42 with incremental rotary encoder, it can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system. The CS-D1008 adopts Leadshine advanced control algorithm. It is very easy to configure and setup. It It is ideal for upgrading open loop stepper systems, or replacing servo systems in some low to middle speed applications.

Compared with an open loop stepper system, a CS-D1008 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …

When compared with a servo system, a CS-D1008 adopted closed loop stepper system can have much higher low-to-middle-speed torque. such a control system also has the advantages of no tuning, no hunting, no overshooting, and much lower cost.


Features:

The main advantages over traditional servo and open loop stepper systems are:

  • Step & direction or CW/CCW control modes
  • Powering 2-phase stepper motors of NEMA 23, 24, 34, and 42
  • Closed-loop, eliminates loss of steps
  • No Tuning, hunting, overshooting, torque margin
  • Reduced motor heating and more efficient
  • Smooth motion and super-low motor noise
  • CE certified and RoHS compliant

That closed stepper system can be used to upgrade open loop stepper systems or replace some servo systems, especially in many small to median speed applications such as CNC routers, CNC mills, CNC laser cutters, CNC plasmas, lab automation instruments, plotters, medical equipment, electronic equipment, small packaging machines, etc.


Supply voltage: 30 to 100 VDC or 20 - 80VAC 

Recommended Supply voltage: 36 to 92 VDC or 30 - 70VAC

Output current: 0.5 to 8 A

Logic signal current: 7 to 16 mA

Pulse input frequency: 200 kHz

minimal pulse width: 2.5 µs

Minimal direction setup: 5.0 µs

Isolation resistance: 500 MΩ 

Operating environment: 

  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient temperature: 0 to 65 °C
  •  Humidity: 40 to 90% RH
  • Operating temperature: 0 to 50 °C
  • Vibration: 10 to 50 Hz / 0.15 mm

Storage temperature: -20 to 65 °C

Protection: Over current; over voltage; chip error; motor cable error; ROM error; auto-tuning   error; position following error 

Weight: Approx. 570 g

Dimension: 151 * 97 * 52 mm  

Programming Cable:

The drive can be tuned with the ProTuner software and an LSK-001 RJ-12 to DE-9 serial cable. Please note a USB to RS232 converter using a FTDI chipset is recommended such as ZTC-005.

Cables:

To connect this driver to a matching Easy Servo motor, you'll also want power and encoder extension cables.


3 meter
5 meter
8 meter
10 meter
Power
-
Encoder
-
    • SKU
      SMC-165
    • Weight
      0.6 kg
    • Dimensions (L x W x H)
      13 x 10 x 4 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought