Motors and Motion Controllers

Combine Ethernet Motion Controller and Breakout Board in a single module. Can control up to 6-axes with Mach3, Mach4 or UCCNC software with onboard I/Os. Up to 400kHz step frequency. The controller can be connected to an additional Breakout Board to extend the number of I/Os. 

Note: The AXBB-E requires 2x power supplies - 1x 5VDC and 1x 12-24VDC. 

The DM805-AI is a stepper motor driver with 0 to 5 VDC analog input for speed control. 18 to 80 VDC powered, with current up to 7.0 A peak.

Programmable stepper pulser which provides signals to control speed, acceleration and direction for a stepper driver.

Programmable stepper pulser which provides signals to control speed, acceleration and direction for a stepper driver.

Provides step and direction signals to two stepper drivers using onboard buttons or external switches

Provides step and direction signals to two stepper drivers using onboard buttons or external switches.

Directly replaces the traditional Parallel port with modern USB. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 100kHz step frequency operation, Fast communication with data buffer for robust and stabile operation. 

***Mini USB cable not included - can be purchased here: USB-003. 

Directly replaces the traditional Parallel port with Ethernet. Can control up to 6-axis with Mach3, Mach4 or UCCNC software. Up to 400kHz step frequency operation. Fast communication with data buffer for robust and stable operation. 

Wireless jog pendant designed to be used with Mach3 or UCCNC software. Has Large LCD screen with backlight and can display up to 6 axes on screen. 10-15 meters transmit range using radio. 

Single Port Breakout Board compatible with traditional Parallel Port. The board has 12 outputs and 5 inputs. All I/Os are optically isolated with 10Mbit/s max speed.

Four axis stepper motor controller fitted with USB and RS-485 ports. Takes simple serial commands and produces ramped frequency profiles for stepper or servo motor control. 

New Version: Now with analog inputs and can be powered from 8 to 35 VDC.

Four axis stepper motor controller fitted with USB and RS-485 ports. Takes simple serial commands and produces ramped frequency profiles for stepper or servo motor control. DIN rail mount version.

New Version: Now with analog inputs and can be powered from 8 to 35 VDC.