N1040-PRR USB Temperature controller Pulse and 2 Relay Outputs 230VAC powered
Economic and efficient temperature controller, with PID, Pulse Output, 2 Relay outputs, USB interface and many other features. 230 VAC powered. Auto tuning and Loop Break Detection.
N1040-PRR is an economic and efficient Temperature controller, developed with modern technology and automatic tuning of PID parameters, ON-OFF control and totally configurable. It has a reduced depth flameproof plastic enclosure.
It accepts 2 and 3 wire Pt100 sensors and thermocouples types J/K/T with decimals on all sensors. It has a fast electrical connection coupler system that reduces installation time.
Single model with 3 configurable outputs for process control and alarm. Configuration protection by password and factory calibration recovery. LBD (Loop Break Detection) function detects failures in the control loop
Features:
- Auto tuning PID
- The outputs are programmable for main control or alarm
- Alarm functions: low, high, differential, low differential, high differential, sensor break
- Two alarm functions can be directed to one single output
- Safe output function allows the user to set control output conditions in case of sensor break or failure
- Digital input
- Simplified programming menu makes operator programming easily
- Indelible electronic serial number with 8 digits can be accessed from the display
- Count up and countdown timer
- LBD (Loop Break Detection) function detects failures in the control loop
- Silicone rubber keypad
- CE and UL certification
Power supply: 100 to 240 VAC ±10 %, 50/60 Hz
Power Consumption: 6 VA
Sensor input:
- J, K, T, thermocouples
- Pt100 RTD
Internal Resolution: 15 bit (32767 levels)
Display: High brightness red LED display
Display Resolution: 12,000 levels (from -1999 to 9999)
Input Sampling Rate: Up to 55 Hz
Accuracy (J, K, T thermocouples): 0.25 % of span ±1 °C
Accuracy (PT100): 0.2 % of span
Communication protocol: USB & RS-485 Modbus RTU
Input Impedance (PT100 and thermocouples): > 10 MΩ
PT100 Excitation Current: 170 µA
Output functions: Control, alarm 1, alarm 2
Output 1: Voltage pulse 5 V, 25 mA
Output 2: 2 x SPST relay, 240 VAC, 1.5 A
Programmable PWM cycle: From 0.5 seconds to 100 seconds
Front panel: IP65, polycarbonate UL94 V-2
Enclosure: IP20, polycarbonate UL94 V-2
Weight: 75 g
Dimension: 48 x 48 x 80 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
