Pump Seal Leak Relay & Thermistor 230VAC

Pump Seal Leak Relay & Thermistor 230VAC

SKU: NTR-212

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

Foxtam Controls
  • Manufacturer: Foxtam Controls
Buy more for less:
1-4items$174.50/ each 
5-9items$157.06/ eachsave10%
10or more items$148.33/ eachsave15%
  • $174.50
Qty:  
In stock(2 items available)

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version

The 11 pin plug relay is designed for the monitoring and alarming in applications such as water contamination of the oil within submersible pumps. It works on the conductive probe principle. In a situation healthy condition the output relay is energised, when the presence of water is detected, i.e. in the case of a pump, the seal fails and the oil becomes contaminated the resistance drops. If the resistance falls below the set level output relay will de-energise and the red LED will extinguish. A green LED indicates the connection of the auxiliary supply. Such pumps often have embedded thermistors within the motor winding this relay will also monitor a series circuit of up to 6 thermistors having a total “healthy” resistance not exceeding 1500 Ohms, the output relay will be energised indicated also by a red LED. Should overheating occur the individual resistance of a thermistor will rapidly rise above 3.3 KOhms at which point the normally energised relay/s will de-energise, accompanied by the red LED extinguishing. The relay will re-energise when the circuit resistance drops below 1.8 KOhms. in the event of a short circuit or auxiliary supply loss the unit will de-energise

Documents:

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version

The 11 pin plug relay is designed for the monitoring and alarming in applications such as water contamination of the oil within submersible pumps. It works on the conductive probe principle. In a situation healthy condition the output relay is energised, when the presence of water is detected, i.e. in the case of a pump, the seal fails and the oil becomes contaminated the resistance drops. If the resistance falls below the set level output relay will de-energise and the red LED will extinguish. A green LED indicates the connection of the auxiliary supply. Such pumps often have embedded thermistors within the motor winding this relay will also monitor a series circuit of up to 6 thermistors having a total “healthy” resistance not exceeding 1500 Ohms, the output relay will be energised indicated also by a red LED. Should overheating occur the individual resistance of a thermistor will rapidly rise above 3.3 KOhms at which point the normally energised relay/s will de-energise, accompanied by the red LED extinguishing. The relay will re-energise when the circuit resistance drops below 1.8 KOhms. in the event of a short circuit or auxiliary supply loss the unit will de-energise

Documents:

Specifications:

  • Nominal supply tolerance: ±15%
  • Isolation: Via transformer
  • Probe supply: 12VDC
  • Max probe current: 2mA
  • Power consumption: 3VA
  • Sensitivity range: Adjustable 4.7 to 100 KOhms
  • Response time: 100 mSec on make
  • Operating level: 3.3 KOhms ±5%
  • Reset level: 1.8 KOhms ±10%
  • Max cold resistance of detection circuit: 1500 Ohms
  • Max No. of PTC sensors: 6
  • Sensor voltage: 2.5 VDC max
  • Output contacts: SPCO 10Amps/250V AC1, DPCO 8Amps/250VAC1
  • Operating temperature: -10 to 60 degC
  • Power Supply 230VAC (24VAC optional)

We carry a selection of the full range of options listed in the datasheet. Non-stocked configurations may be available but may be subject to minimum order quantities or different pricing. Contact Us for more information

    • SKU
      NTR-212
    • Weight
      0.2 kg
    • Dimensions (L x W x H)
      10 x 5 x 5 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

  • 11 pin DIN Rail Base
    Sorry, we only have 999999 of that item available
    11 pin DIN Rail Base
    SKU:NTR-220
    In stock(11 items available)
    • $11.86
  • 8 pin DIN Rail Base
    Sorry, we only have 999999 of that item available
    8 pin DIN Rail Base
    SKU:NTR-221
    In stock(12 items available)
    • $11.17

Customers who viewed this product also bought

  • 11 pin DIN Rail Base
    Sorry, we only have 999999 of that item available
    11 pin DIN Rail Base
    SKU:NTR-220
    In stock(11 items available)
    • $11.86