20 mA Adjustable Dual Setpoint Relay

20 mA Adjustable Dual Setpoint Relay

SKU: NTR-315

1 to 20 mA adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

Foxtam Controls
  • Manufacturer: Foxtam Controls
Buy more for less:
1-4items$204.48/ each 
5-9items$184.03/ eachsave10%
10or more items$173.80/ eachsave15%
  • $204.48
In stock(3 items available)

YWRI2T provides two separately controlled trip levels, an adjustable current level can be specified anywhere from 1 to 20 mA.

Both outputs are changeover relay contacts. This allows you to activate alarms or equipment when the analog input signal is over or under the set point.

The two relays can be wired together for in-band or out-of-band alarms, or wired separately for two separate alarm trip points.

Please note that the YWRU2T doesn't have a latched relay option, therefore both of the output relays will reset when the input signal returns below their set points.

The relay has an isolated power supply, allowing the input single to be at a different ground level to the supplied 24 VDC, or the unit to be connected at any point along a 4 to 20 mA loop.

We carry a selection of the full range of options listed in the datasheet. Non-stocked configurations may be available but may be subject to minimum order quantities or different pricing. Contact Us for more information

  • Power Supply: Isolated 24 VDC
  • Power Consumption: 3 VA max
  • Hysteresis: Fixed at 2%
  • Repeat accuracy: ±2% at constant ambient
  • Input Range: 1 to 20 mA adjustable
  • Max over voltage:15 VDC permanently
  • Input Impedance:10 kΩ
  • Nominal supply tolerance: ±15%
  • Output contacts: SPCO 10 A @250 VAC
  • Max breaking capacity: SPCO 4000 VA
  • Mechanical life: 30 Million ops
  • Electrical life:200K ops at max rated load
  • Manufacturer's Part: YWRI2T
    • SKU
    • Weight
      0.14 kg
    • Dimensions (L x W x H)
      9 x 9 x 5 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought