YWRIT Din rail 1-20mA adjustable single setpoint trip amp
The YWRIT is a 1 to 20 mA adjustable setpoint trip relay with one SPCO relay output. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.
YWRIT can operate in two different modes. "Auto Reset” without latching mode and "Manual Reset" latching mode. provides two separately controlled trip levels, an adjustable voltage level can be specified anywhere from 1 to 20 mA.
"Auto Reset” without latching mode is where the output relay is energised when the monitored circuit rises above the level selected via the front potentiometer. The output relay will de-energise when the current falls back below the level selected less the set hysteresis adjustable 5 to 50%,
"Manual Reset" latching mode is where The output energises when the monitored circuit rises above the level selected by the front potentiometer. Once energised the relay will remain latched even if the monitored current falls below the set level less any selected hysteresis. Resetting is achieved by opening the link between terminals Y1 & Y2.
The relay has an isolated power supply, allowing the input single to be at a different ground level to the supplied 24 VDC, or the unit to be connected at any point along a 4 to 20 mA loop.
We carry a selection of the full range of options listed in the datasheet. Non-stocked configurations may be available but may be subject to minimum order quantities or different pricing. Contact Us for more information.
- Power Supply: Isolated 24 VDC
- Power Consumption: 3 VA max
- Hysteresis: 5 to 50%
- Nominal supply tolerance: ±15%
- Repeat accuracy: ±2% at constant ambient
- Input Range:1 to 20 mA adjustable
- Max over voltage:15 VDC permanently
- Input Impedance:10 kΩ
- Output contacts: SPCO 10 A @250 VAC
- Max breaking capacity: SPCO 4000 VA
- Mechanical life: 30 Million ops
- Electrical life: 200 kops at max rated load
- Manufacturer's Part: YWRI.T
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
