YWRIT Din rail 1-20mA adjustable single setpoint trip amp
The YWRIT is a 1 to 20 mA adjustable setpoint trip relay with one SPCO relay output. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.
YWRIT can operate in two different modes. "Auto Reset” without latching mode and "Manual Reset" latching mode. provides two separately controlled trip levels, an adjustable voltage level can be specified anywhere from 1 to 20 mA.
"Auto Reset” without latching mode is where the output relay is energised when the monitored circuit rises above the level selected via the front potentiometer. The output relay will de-energise when the current falls back below the level selected less the set hysteresis adjustable 5 to 50%,
"Manual Reset" latching mode is where The output energises when the monitored circuit rises above the level selected by the front potentiometer. Once energised the relay will remain latched even if the monitored current falls below the set level less any selected hysteresis. Resetting is achieved by opening the link between terminals Y1 & Y2.
The relay has an isolated power supply, allowing the input single to be at a different ground level to the supplied 24 VDC, or the unit to be connected at any point along a 4 to 20 mA loop.
We carry a selection of the full range of options listed in the datasheet. Non-stocked configurations may be available but may be subject to minimum order quantities or different pricing. Contact Us for more information.
- Power Supply: Isolated 24 VDC
- Power Consumption: 3 VA max
- Hysteresis: 5 to 50%
- Nominal supply tolerance: ±15%
- Repeat accuracy: ±2% at constant ambient
- Input Range:1 to 20 mA adjustable
- Max over voltage:15 VDC permanently
- Input Impedance:10 kΩ
- Output contacts: SPCO 10 A @250 VAC
- Max breaking capacity: SPCO 4000 VA
- Mechanical life: 30 Million ops
- Electrical life: 200 kops at max rated load
- Manufacturer's Part: YWRI.T
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
