Non-isolated Converters

Dual 120 Ohm, 5%, 1W resistors for RS-485 bus termination or general purpose use

Dual 4K7 Ohm, 5%, 1W resistors for general purpose use

470 Ohm & 330 Ohm Resistive Divider, for stepping down a 24V DC supply to 10V. Useful as a feed voltage to a potentiometer for 0-10V control for VSD, etc.

Dual 500 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 2 to 10V

Dual 250 Ohm, 0.1%, 1W resistors, suitable for converting 4 to 20 mA loops to 1 to 5V.

Head mount signal conditioner takes thermocouples and Pt100 sensors. Programable zero and span. Loop powered.

Mini Size 0-5A AC RMS Current to 0-10VDC Transmitter

Mini Size 0-5A AC RMS Current to 4-20mA Transmitter

Tiny signal conditioner for potentiometers. Provides 2.5 V excitation. 3-wire 0 to 10 V output.

Tiny signal conditioner for potentiometers. Provides 2.5 V excitation. 3-wire 4 to 20 mA output.

The SPT-61 signal converter is equipped with Pt 100 / Pt 500 / Pt 1000 type input, 4-20mA output. Loop powered.

Head mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA. Programmable zero and span via micro USB interface. Loop powered.

Txconfig USB programming cable with DIN43650 interface for configuring Novus NP620 pressure sensors.

The TxConfig USB is the configuration interface to configure the whole NOVUS Smart Transmitters family such as TxRail, TxIsoRail, RHT sensors 

USB programming cable for Novus TxMini-M12 signal conditioners.

The TxMini is a 4-20 mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. PCB solder tabs for connection.

The TxMini-M12 is a 4-20mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. DIN-43650 connector.

The TxMini-M12 is a 4-20mA transmitter for Pt100 or Pt1000 sensors. It's ideal to be used in places with space restrictions. M12 connector.

The TxMini-M12-RS485-CN is a Pt100 sensors with a RS485 Modbus RTU output. It's ideal to be used in places with space restrictions. M12 connector and terminal connections for PT100.

TxMiniBlock is a cost-effective programmable RTD temperature transmitter for head mounting. With a unique microprocessor based technology it features full PC configuration of range and calibration. 4-20mA loop powered

DIN rail mount signal conditioner takes thermocouples, Pt100 sensors or 0 to 50 mV in and outputs 4 to 20 mA and 0 to 10VDC. Programmable zero and span. 10 to 30 Vdc powered.

Non-isolated Voltage signal to 4-20mA signal converter. Convert any voltage signal from 0 to 30V or 0 to 60V to 4-20mA. full scale of the input signal needs to be below 2.3V or above 4.9V. The two trimpots and the switch at the top allow the user to easily configure the voltage range to be converted.