Foxtam Controls

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

MOD-TC-2 Thermistor monitoring Relay is used to monitor PTC sensors embedded within motor windings. On resistance rise above 3.3 kΩ  the alarm output will trip.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

Standard 11 pin female connector. Screw terminals. Suits our range of relays and timers.

The YWRIT is a 1 to 20 mA adjustable setpoint trip relay with one SPCO relay output. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

A monitoring relay designed to monitor the integrity of a 4 to 20 mA signal.

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

11WRSTCT(KLIXON,2xSPCO) pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Klixon version.

6mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 Amps / 250VAC AC1

6 mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 A / 250 VAC AC1

6 mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 A / 250 VAC AC1

The MOD-W-1 is a DIN Rail mount liquid level control relay powered from 24 VDC. It features adjustable sensitivity and time delay from 0.1 to 10 sec. SPCO output with selectable pump up or pump down modes as well as relay proving function.

A conveniently packaged Din rail mounted AC or DC voltage input to an adjustable 4-20mA output module. Designed for process control systems with “HAND / OFF / AUTO” applications.

Programmable latching and sequence relay. The outputs are four individual single pole normally open contacts. The unit is programmed via three front selector switches.

Mechanical plant extension timers, also known as "Override timers" or "caretaker timers" within the BMS & HVAC industry. Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. The moment the setting knob is turned pass zero to the set time required, the output contact switches, and the timer will then start running back to zero.

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

6mm wide complete package of socket and relay combined, the base features an integral LED indicator and a relay retaining clip. SPCO contact rated 6 Amps / 250VAC AC1

Compact Din rail or foot mounted “CT” style AC current proving switches, the sensing range (set point) being adjustable 0.2-20A.

Compact Din rail or foot mounted “CT” style AC current proving switches, the sensing range (set point) being adjustable 2-200A.

41F-20 is a 20 Way Jumper Bar to suit 6mm Relay

41F-TAG sheet of 16 Marker tabs for 41F series 6mm Relays

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor or clean contact input signals. The period between pulses is adjustable from 0.06 to 160  secs

Standard 8 pin female connector. Screw terminals. Suits our range of relays and timers.

These double channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

LAST UNITS!!
No Backorders available.