Foxtam Controls

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (DPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

DIN rail mount, multi-voltage range from 12 to 250 VAC/DC changeover (SPCO) latching relay, 16 A maximum switching current. Separate toggle, set and reset inputs.

3×1 m long conductive level probes come with probe holder.

Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. When the setting knob is turned passed zero to the set time required, the output contact/s switch, the timer will then start running back to zero and contacts switch back.

Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. When the setting knob is turned passed zero to the set time required, the output contact/s switch, the timer will then start running back to zero and contacts switch back.

MOD-TC-2 Thermistor monitoring Relay is used to monitor PTC sensors embedded within motor windings. On resistance rise above 3.3 kΩ  the alarm output will trip.

DIN rail mount, SPCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

DIN rail mount, 3PCO contact type power relays have tri-voltage relay coil of 24 VAC/DC, 110 VAC, 230 VAC with 16 A maximum switching current @ 250 VAC.

DIN-rail mount, multi-function timer with 4PCO relay output rated at 8 A/ 250 VAC. 12 to 240 VAC or VDC powered. Eight selectable timing modes and an adjustable time period from 0.1 second to 10 days.

DIN rail mount, 3-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @ 250 VAC. These are transformers based, thus it will ignore transients and harmonic distortions.

DIN rail mount, 4-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @250 VAC. These are transformer based, thus it will ignore transients and harmonic distortions.

The 11WA8 is a plug in alarm integrator that has 8 inputs and 1 relay output. The output is active when any one of the inputs is active (logical OR function) It accepts 24 VAC/DC input signals.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

11WRSTCT(KLIXON,2xSPCO) pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Klixon version.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

These units are designed to protect small 12VDC (optional 24 and 48VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

These units are designed to protect small 24VDC (optional 12 and 48VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

These units are designed to protect small 48VDC (optional 12 and 24VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

These single channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

These double channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

Slim Line, DIN Rail mount, multi-function timer. SPCO output, dual LEDs indication. Multiple time range 0.1 s to 100 hours. 12 to 240 VAC/VDC powered.

SMH-TC 12VDC Signal Line Surge Arrester. Suitable for 0-10 V signals.