Foxtam Controls

Slim isolated signal converter with dual output converts a single, selectable analog input signal to dual analog outputs. The input signal type and each output signal type can be configured with on-board DIP switches.

4 to 20 mA looop powered 24 VDC with primary current of 100 A. Accuracy class 1

4 to 20 mA loop powered 24 VDC with primary current of 250 A. Accuracy class 1

The YWA10 is a relay alarm module that features 10 inputs, 2 separate relay outputs. Accepts 24 VAC/DC input signals and can be DIN rail mounted.

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

A Din rail mounted current sensing relay dedicated for DC earth fault monitoring, such as insulation deterioration on a DC system. The unit is supplied complete with a dedicated DC Earth Fault CT

Slim isolated selectable analog input signals with selectable single analog output. It features on-board DIP switches that enable the user to select their preferred input/output signal.

1 to 20 mA adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

0.1-10 VDC adjustable setpoint trip relay with two independent outputs. 2% hysteresis at each setpoint. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

The YWRIT is a 1 to 20 mA adjustable setpoint trip relay with one SPCO relay output. SPCO relay outputs rated to 10 A @ 250 VAC. 24 VDC powered and DIN rail mount.

Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. When the setting knob is turned passed zero to the set time required, the output contact/s switch, the timer will then start running back to zero and contacts switch back.

Totally mechanically driven by a clockwork spring, therefore no auxiliary supply is required. When the setting knob is turned passed zero to the set time required, the output contact/s switch, the timer will then start running back to zero and contacts switch back.

These double channel surge arresters are designed to protect all DC “floating” analogue signal lines both voltage and mA, including TTL levels and PT100 signals.

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor or clean contact input signals. Period between pulses adjustable 0.5 second to 21 mins

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

11WRSTCT(KLIXON,2xSPCO) pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Klixon version.

Din rail mounted under-speed relay suitable for all kinds of machinery to detect loss of speed and pulse continuity. It accepts NAMUR proximity switch, PNP sensor or clean contact input signals. Period between pulses adjustable 0.06 to 160  secs 

Programmable latching and sequence relay. The outputs are four individual single pole normally open contacts. The unit is programmed via three front selector switches.

11WRSTC pump seal leak monitor relay / water leak detection relay & thermistor monitoring relay features detection of water contamination of oil, detection of water leaks from pipes in buildings, isolated probe supply and LED indication, Also available Klixon version.

DIN rail mount, 3-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @ 250 VAC. These are transformers based, thus it will ignore transients and harmonic distortions.

DIN rail mount, 4-wire system phase failure relays with independent over & under voltage control and optional adjustable time delay sequence (0.1 to 10 sec). SPCO relay output rated to 10 A @250 VAC. These are transformer based, thus it will ignore transients and harmonic distortions.

These units are designed to protect small 12VDC (optional 24 and 48VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

These units are designed to protect small 24VDC (optional 12 and 48VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps

These units are designed to protect small 48VDC (optional 12 and 24VDC) floating power supplies and systems and are wired in series,maximum system load 4 Amps