Photo Electric Switch PNP Output LS5T-6MP
SKU: PES-030
LS5T-6MP Mini Photoelectric Sensor, Through Beam Type, 6m Range, PNP Output
LAST UNITS!!
No Backorders allowed.
LS5T-6MP Mini Type Photoelectric Sensor with PNP Output. This photoelectric sensor is a through beam type. The sensor comes in two parts - a transmitter and a receiver. The transmitter transmits an infra red beam to the receiver. The receiver will detect when an object breaks the beam. Detection distance is up to 6m.
NOTE: White "MODE" wire is left disconnected for normally open (NO) operation, and connected to ground for normally closed (NC).
- Power supply: 10-30 VDC
- Power Consumption: 40 mA max.
- Maximum Output Current: 100 mA @ 24 VDC
- PNP Transistor Output
- Output Mode switchable "Light On" or "Dark On"
- Through Beam Type
- Detection Distance: 0-6 m(1 cm Opaque object)
- Environmental Illuminance: Sunlight 10,000 lux, incandescent 3,000 lux
- Ambient Temp.&Humidity: -25 ~ +55 °C / 35~85%RH
- Dimensions: 22 x 34 x 14 mm
- Noise Resistance: 1,000 V pulse / 1uS width
- Safety Category: BS EN60947-5-2, IP45
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
