Home :: Controllers :: Process (PID) :: N2000 PID Controller with RS-485

N2000 PID Controller with RS-485

N2000 PID Controller with RS-485

The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes. With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.

Power supply for remote loop powered transmitters is standard and is a must for high-end applications.

From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC’s or SCADA networks, the N2000 is the right answer to your needs for industrial or laboratory automation.

The N2000S model is specific for applications in controlling servo motorized valves, servo actuators and dampers by means of two time proportional relays.

A Modbus RTU RS-485 connection is fitted. With a RS-485 interface you can use our ViewPID Software to help you monitor, tune and record the performance of the controller

You can use the Superview software or ISEE-Modbus Software to monitor and set parameters in the controller

Features

  • Universal Input accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc.
  • Double LED display: red for PV and green for SV.
  • Dual SPST 3A/250 Vac relays and dual SPDT 5A/250 Vac relays can be individually programmed for control or alarm.
  • Isolated 4-20mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital input or output (10 Vdc/20 mA).
  • Sampling rate: 4 measurements per second.
  • One digital input for dry contact with 5 programmable functions.
  • Remote setpoint input for 4-20 mAdc signal (N2000).
  • 24 Vdc/30 mA supply output for remote transmitter excitation.
  • RS-485 comm with Modbus RTU protocol.
  • Auto tuning PID control.
  • Auto/Manual mode, bumpless transfer.
  • Programmable Soft start up to 9999 seconds.
  • Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
  • Measured value resolution: 12,000 levels.
  • Control output update: 250 ms.
  • Up to four configurable relays, two timer alarms.
  • Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event.
  • Alarm initial blocking function.
  • Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac.
  • Maximum consumption: 4 VA.
  • Operating environment: 0 to 55ºC, 20 to 90%RH.
  • Front panel: IP65, Polycarbonate UL94 V-2.
  • Back panel: IP30, ABS+PC UL94 V-0.
  • Dimensions: 48 x 96 x 92 mm.
  • Panel cutout: 45.5 x 93 mm.
  • Weight: 240 g (265 g with options).

Download the N2000 and N2000S Flier

Download the N2000 Operating Manual

Download the N2000S Operating Manual

Feature Comparison:

Support:

SKU: PID-010

2 available

Qty. Price
(AUD ex. GST)
1 to 4 $259.00
5 to 9 $233.10 (10% off)
10+ $220.15 (15% off)
Compare product with:

Categories