N2000S Servo Positioning PID Controller with RS-485, 24 V
N2000S Servo Positioning PID Controller with RS-485, 24 V Powered
The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes. With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
The N2000S model is specific for applications in controlling servo motorized valves, servo actuators and dampers by means of two time proportional relays. Moreover it has an analog output that can be programmed to control or retransmit input or setpoint signals. Its universal analog input accepts most industry manufactured sensors and signals
With RS-485 interface you can use our ViewPID Software to monitor, tune and record the performance of the controller.
Also, you can use the Superview software or ISEE-Modbus Software to monitor and set parameters in the controller.
Features
- One digital input for dry contact with 5 programmable functions
- Remote setpoint input
- Auto tuning PID control
- Auto/Manual mode, bumpless transfer
- Programmable Soft start up to 9999 seconds
- Up to four configurable relays, two timer alarms
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
- Alarm initial blocking function
Power supply: 24 Vdc/ac
Power consumption: 3 VA
Sampling rate: 5 samples per second
Output: 4 to 20 mA or 0 to 20 mA analog output for process variable or Setpoint retransmission
Digital input: 4-function
Universal Input accepts:
- Thermocouples type J, K, T, N, R, S
- Pt100 RTD
- Linear 4-20 mA(Remote setpoint), 0-50 mV, 0-5 Vdc.
Accuracy:
- J, K and T: 0.25% of the minimum range ±1°C
- N, R and S: 0.25% of the minimum range ±3°C
- Pt100, mA, mV or V: 0.2% of the maximum range
Internal resolution: 19500 levels
Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
Display: Double LED display (red for PV and green for SV)
Display range: 12000 levels (-1999 to 9999)
Control output: Two SPST relays - 3 A / 250 Vac
Alarm outputs: Two SPDT relays - 3 A / 250 Vac
Analog output resolution: 1500 levels
Communication interface: RS-485 Modbus RTU
Operating temperature: 0 to 55 °C
Operating humidity: 20 to 85 %RH
Protection:
- Frontal: IP65
- Case: IP30
Weight: 256 g
Panel cutout: 45 x 93 mm
Dimension: 48 x 96 x 92 mm
Dispatch
In-stock orders are dispatched within 2 business days.
Shipping options
We deliver across Australia and internationally by any of the following methods:
- Australia Post Express
- Australia Post Parcel Post
- DHL
- FedEx (only international)
- Freight account. We'll email packaging dimensions when the shipment is ready to be book.
*Transit times vary depending on the shipping method and destination.
Store Pickup - Carrum Downs, Victoria, 3201
Order before 11am to collect after 2pm the same day. Mon–Fri, 9am–5pm, excludes public holidays.
RETURNS
How to return an item Contact us before sending anything back. Email info@oceancontrols.com.au or call +61 3 9708 2390. We'll confirm eligibility and guide you to the return process.
Return window 14 days from dispatch date.
Condition required Items must be unused and in original packaging, including all documentation and manuals.
Restocking fee A 20% restocking fee applies to all accepted returns. Return shipping costs are the customer's responsibility.
Non-returnable items
- Custom-made or specially imported products
- Software licences (some software have trial versions available)
- Items not in original, as-new condition
WARRANTY
How to make a warranty claim Before returning anything, please contact us. Our engineers can often resolve the issue remotely. If a return is required, our team will provide you with a warranty form to include with the goods.
What's covered Defects in materials and workmanship under normal use and correct installation.
What's not covered The warranty does not cover damage or failures caused by factors outside our control, including incorrect installation, unauthorised alterations or modifications, or any installation or use not recommended by the manufacturer.
Standard warranty All products carry a 12-month warranty from the date of purchase unless stated otherwise.
Extended warranty
- Labjack: 5 Years
- Atop: 5 Years
- MeanWell: 3 Years
- Teracom: 3 Years
- Novus: 3 Years
