Temp-DM Duct Temperature Sensors 0-10VDC 250mm

Temp-DM Duct Temperature Sensors 0-10VDC 250mm

SKU: RHT-028

Duct-mount temperature sensor with 250 mm long probe. 0-10 V output.

  • Manufacturer: Novus
Buy more for less:
1-4items$121.79/ each 
5-9items$109.62/ eachsave10%
10or more items$103.53/ eachsave15%
  • $121.79
In stock(3 items available)

The TEMP-DM transmitter series incorporate the best high accuracy and great stability temperature sensors. They convert the measured values into linear 0 to 10VDC signals.

The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows® based software.

The TEMP-WM model is dedicated to wall mounted applications and the TEMP-DM version is suitable for duct and through-the-wall applications.


  • Internal protection against reversed voltage wire polarity.
  • No electrical isolation between input, output and power circuits.

Note: Temp-DM Duct Mount can be purchased with 150mm and 250mm probes

    • SKU
    • Weight
      0.35 kg
    • Dimensions (L x W x H)
      32 x 8 x 7 cm

Power supply: 18 to 30 VDC

Output: 0 to 10 Vdc or 10 to 0 Vdc

Output resolution: 0.003 mA 

Output load (RL) (max. in Ohms): 10 kOhms minimum.

Ingress Protection:

  • Electronic module case: IP65
  • Sensor probe: IP40

Cable input: PG7 cable gland

Temperature measurements:

  • Accuracy: 0.5 °C at 25 °C
  • Repeatibility: ±0.1 °C
  • Range: programmable between -50 and 120 °C (please check operational limits)
  • Response Time: Up to 30 s in fairly still air.

Operational limits:

  • Electronic module(WM-DM): -20 to +65 °C, 0 to 95% RH
  • Sensor and Probe (DM): -40 to +100 °C

Dimensions: 70 x 80 x 35 mm

Note: When measuring temperatures higher than +65 °C or lower than -20 °C, only 50% of the probe total length must be inserted into the measured environment.

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products