Temperature & Humidity

Replacement wick for the Wet/Dry bulb humidity psychrometers.

Polyethylene dust cover for wall-mount and duct-mount relative humidity and temperature sensors.

Sintered bronze dust cover for wall-mount and duct-mount relative humidity and temperature sensors.

TERP-NTC10K3 sensors are wall mount temperature sensor fitted with NTC 10K thermistor

SS316 Stainless Steel Flange for Comeco RHB-1PV-S 4 to 20 mA Humidity Probe with Sintered Filter. 

Replacement sensor for Novus wall mount and duct mount temperature transmitters

Temperature ONLY

Latest sensor tip model RHT-35. Replacement sensor for Novus wall mount, duct mount humidity and temperature transmitters and controllers.

Please Note this sensor tip is ONLY compatible with devices that carry the SAME sensor tip. Please make sure your device has an identical sensor tip before ordering.

TSH202 is an indoor digital humidity sensor, measuring also temperature. It provides a low cost option for humidity and temperature monitoring for home and industrial automation.

TSH300v2 is a precision temperature and humidity sensor with a Modbus RS-485 interface.. The TSH300v2 is housed in a plastic box.

TSH206 is 1-wire, low cost option for humidity and temperature monitoring. The TSH206 is housed in a plastic box.

The DCT device configuration tool is used for the configuration of the SyxthSense Room Solutions range.

Panel mount temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 4-20mA output. Cable length 3 meters.

Panel mount Temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 0 to 10V output. Cable length 3 meters.

Panel mount temperature (-20 to 80degc) and humidity (0 to 100% non condensing) sensor with RS485 Modbus RTU output. Cable length 3 metres

Wall mount temperature and humidity sensor with linear 0 to 10V output.

Wall mount temperature and humidity sensor with Modbus RTU RS485 output.

Wall mount temperature (-20 to 80degc) and Humidity (0 to 100% non condensing) sensor, linear 4 to 20mA output. 

Loop powered probe for measuring the humidity of air or non-agressive gasses. 2 wire, 4 to 20 mA outputs signal

Replacement sensor tip for Novus RHT-Climate humidity and temperature transmitters.

Sensor tip model RHT-Climate products. 

TER-BAC sensors are designed to detect temperature in the room spaces and have BACnet MS/TP communications.

Loop powered probe for measuring the humidity of air or non-aggressive gasses. 2 wire, 4 to 20 mA outputs signal

RK330-02 Wall mountTemperature and Humidity Sensor with Display and 4 to 20 mA output. 12-24VDC Powered

RHR-BAC sensors are designed to detect relative humidity and temperature in the room spaces and have BACnet MS/TP communications.

Wall mount temperature and humidity sensor with LCD display and linear 4 to 20 mA output.