SST Liquid Level Sensor
The SST Liquid Level Sensor is an industrial grade level switch which provides single point liquid detection via an open collector push/pull output. This optical liquid level sensor has no moving parts to wear out or get stuck.
The SST Liquid Level Sensor provides single point liquid detection via an open collector push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks to its minimal solid state design, this sensor has been built without moving or mechanical parts that can be jammed and stop working.
An infra-red LED and phototransistor accurately positioned at the base of the sensing tip ensure good optical coupling between the two when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes from the cone, causing a change in the amount of light present at the phototransistor, which makes the output change state.
Features:
- Supply Voltage: +4.5 Vdc to +15.4 VDC
- Output Current: 100 mA
- Temperature Range: -25 to +80 °C
- Polysulphone Housing Tip
- M12 threaded connector (mounted from outside)
Documents:
The SST Liquid Level Sensor provides single-point liquid detection via an open collector push/pull output. This optical liquid level sensor features a small design that allows for installation in areas where space is limited. Thanks to its minimal solid-state design, this sensor has been built without moving or mechanical parts that can be jammed and stop working.
An infra-red LED and phototransistor accurately positioned at the base of the sensing tip ensure good optical coupling between the two when the sensor is in the air. When the sensing tip is immersed in liquid, the infrared light escapes from the cone, causing a change in the amount of light present at the phototransistor, which makes the output change state.
Features:
- Supply Voltage: +4.5 Vdc to +15.4 VDC
- Output Current: 100 mA
- Temperature Range: -25 to +80 °C
- Polysulphone Housing Tip
- M12 threaded connector (mounted from outside)
- Manufacturer Part No LLC200D3SH-LLPK1
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
