DM556 Anti-Resonance Stepper Motor Drive
DM556 fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 20 to 50 VDC powered with output current up to 5.6 A peak.
The DM556 is the latest generation of stepper motor drivers. This fully digital microstepping drive is based on a DSP with an advanced control algorithm that allows tuning of the current and position feedback loops in the drive and allows you to counter resonances that would otherwise stall the motor.
The driver is a current-chopping driver with a wide DC voltage input range and will suit a wide range of NEMA 17 to 24 motors. Microstepping allows you to achieve fine precision from your motor. The anti-resonance control algorithm produces smoother motion and allows higher top speeds than other microstepping driver systems.
Self-configuration and parameter auto-setup technology makes it easy to get the maximum performance from your motor. When the driver is tuned, the motor runs with much less noise, less heating and smoother movement than could be achieved with other drives on the market. These features make the DM556 excellent for all applications but are particularly advantageous for applications that require low-speed smoothness.
Without fine tuning, the drive will run at least as well as a pure-sinusoidal driver. To tune the driver further than the automatic tuning, you will also require the LSK-001 programming cable.
Features:
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimum responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
- Microstep resolutions programmable, from full-step to 102,400 steps/rev
- TTL compatible and optically isolated inputs
- Automatic idle-current reduction and software configured reduction rate
- Suitable for 2-phase and 4-phase motors
- Over-voltage, over-current, phase-error protections
- Support PULSE/DIRECTION and CW/CCW modes
Applications:
The drive is suitable for a wide range of stepping motors, from NEMA frame size 17 to 24. It can be used in various kinds of machines including CNC machines, laser cutters, laser markers, high precision X-Y tables and labeling machines. Its unique features make the DM442 an ideal solution for applications that require both low-speed smoothness and high speed performance.
Supply voltage: 20 to 50 VDC
Output current: 0.5 to 5.6 A
Logic signal current: 7 to 16 mA
Pulse input frequency: 200 kHz
Isolation resistance: 500 MΩ
Operating temperature:
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient temperature: 0 to 50 °C
- Humidity: 40 to 90%RH
- Operating temperature: 70°C Max
- Vibration: 5.9 m/s² Max
Storage temperature: -20 to 65 °C
Weight: Approx. 280 g
Dimension: 112 x 75.5 x 34 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
