DM556E Anti-Resonance Stepper Motor Drive
DM556E fully digital microstepping stepper motor driver with anti-resonance tuning. Automatic or computer-driven tuning. 18 to 50 VDC powered with output current up to 5.6 A peak.
The DM556E is a digital stepper drive with simple design and easy setup. By implementing Leadshine advanced stepper control technology, this stepper drive is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20-50VDC and it can output up to 5.6A current.
All the micro step and output current are done via DIP switches. Therefore, the DM556E are ideal choices for applications requiring simple step & direction control of NEMA 23, 24 and 34 stepper motors.
Without fine tuning, the drive will run at least as well as a pure-sinusoidal driver. To tune the driver further than the automatic tuning, you will also require the LSK-002 programming cable.
Features:
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Auto-tuning to match wide-range NEMA 23 and 24 stepper motors
- 200 KHz max pulse input frequency
- 16 microstep resolutions of 200-51,200 via DIP switches
- TTL compatible and optically isolated inputs with 5V or 24V
- Over-voltage and over-current
- Step & direction (PUL/DIR) control
- 8 output current settings of 1.8-5.6A via DIP Switches
- Idle current reduction to 50% or 90% selection via SW4
- Soft-start with no “jump” when powered on
- Fault output
Supply voltage: 18 to 50 VDC
Output current: 1.8 to 5.6 A
Logic signal current: 7 to 16 mA
Pulse input frequency: 200 kHz
Isolation resistance: 500 MΩ
Operating temperature:
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient temperature: 0 to 50 °C
- Humidity: 40 to 90%RH
- Operating temperature: 0°C －40°C
- Vibration: 10-50Hz / 0.15mm
Storage temperature: -20 to 65 °C
Weight: Approx. 250 g
Dimension: 112 x 75.5 x 34 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
