ACS606 Brushless Servo Motor Drive
Leadshine ACS606 brushless servo motor driver for 10W to 200W, AC or DC brush-less motors.
Leadshine's fully digital AC servo drive ACS606 is developed with 32-bit DSP based on advanced control algorithm. Since its input commands are PUL/DIR signals, the users can upgrade stepping drives to the ACS606 without changing control systems. The ACS606 can offer high precision, high speed and high reliability performance, and widely used in inkjet printers, engraving machines, and etc. A built-in controller can be used for testing and tuning. PC based and handheld configuration & tuning tools can meet different tuning environments or requirements. Use lead LSK-001 and ProTuner software to tune the drive.
The ACS606 can drive both DC brush-less and AC servo motors.But it is more suitable for the DC brush-less servo motors. Compare to the ACS806, the ACS606 has less I/O, thus has smaller size and higher cost-effective.
Features:
- FOC-SVPWM technologies
- PC based and handheld configuration tools
- Self-test function with trapezoidal velocity profile
- Support PUL/DIR and CW/CCW control signals
- Opto-isolated, support single-ended and differential inputs
- Following error lock range adjustable
- Over-voltage, over-current, encoder failure protections
- 10 latest failures self-record function
Supply voltage: 18 to 60 VDC
Peak output current: 15 A
Continuous output current: 6 A
Position following error: ±1 count
Velocity accuracy: ±2 rpm
Maximum acceleration speed (No load): 80 rpm/ms²
Maximum speed: 3000 rpm
Electronic gear rate: 1/255 to 255
Logic signal current: 7 to 16 mA
Pulse input frequency: 200 kHz
Isolation resistance: 500 MΩ
Current provided to encoder: 100 mA
Operating environment:
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient temperature: 0 to 50°C
- Humidity: 40 to 90% RH
- Vibration: 5.9m/s² Max
Storage temperature: -20 to 65 °C
Weight: Approx. 280g
Dimension: 112 x 75.5 x 34 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
