ToughSonic 30 - 9.1 Meter Ultrasonic Sensor (RS-485)
Senix ToughSonic® 30 ultrasonic sensor TSPC-15S-485 measures level and distance through the air using ultrasonic sound waves up to a distance of 30 feet (9.1 m).
The ToughSonic 30 ultrasonic sensor has a maximum range of 9.1 m. Like all ToughSonic sensors, it’s built for durability and ease of use in tough industrial environments. It’s fully submersible, corrosion resistant, shock resistant ultrasonic sensors are housed in 316 stainless steel and all around tough. It’s also fully configurable with our SenixVIEW software. ToughSonic 30 s include our famous “Teach†feature for push button configuration. This compact sensor is used around the world on remote liquid level systems, heavy equipment, factory automation applications and more.
For longer range applications or for chemically resistant sensors, please see our full line of ToughSonic and ToughSonic CHEM sensors..
The 1.5 inch (38.1 mm) housing has 1.5 inch NPT threading on each end and a smooth middle section for a variety of mounting options. This sensor has a 9-wire cable that allows up to six simultaneous serial, analog and/or switch outputs. These workhorse sensors are used around the world in remote monitoring and demanding factory environments.
- 1.88 inch (48 millimeter) marine grade type 316 stainless steel housing.
- Sealed epoxy potting for wet and dirty applications.
- Ruggedized piezoelectric ultrasonic transducer, potted in place.
- Hardened ToughSonic internal electronics.
- UV resistant, potted-in cable.
- Short and overload protected input / output.
- Free SenixVIEW PC configuration and analysis software controlling more than 60 performance parameters, and dozens of viewing, analysis and maintenance options.
- Push-button “Teach†feature.
- Multi-sensor network capable.
- Up to six simultaneous, industry standard outputs
- SYNC feature: Permits up to 32 sensors to operate in close proximity without interference
- Power Supply: 10-30 VDC
- Current draw: 70 mA (max), 45mA @ 24 VDC (typ)
- Maximum Range: 9.1 meters
- Optimum Range: 10 inches - 20 feet (25.4 cm- 6.1 m)
- Temperature: -40° to 70° C
- Humidity: 0 to 100% operating
- Protection: NEMA-4X, NEMA-6P, IP68
- Transducer: Ruggedized piezoelectric
- Compensation: Temperature compensated
- Resolution: Digital: 0.0068 in. (0.172 mm); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA)
- Repeatability: Nominal 0.2% of range @ constant temp. Affected by target, distance, environment
- Update Rate: 10 Hz (100 ms), SenixVIEW adjustable; also affected by SenixVIEW filter selections
- Voltage Output: 0-10, 0-5 VDC or SenixVIEW customized; 10 mA max
- Current Loop: 4-20 mA or SenixVIEW customized, current sourcing, max. loop 450ohm, teachable endpoints
- Sinking Switch: 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication
- Sourcing Switch: 150 mA max. @ input voltage, teachable set point & polarity, fault indication
- Output Select: Defaults are voltage & current loop
- Protocol: RS-232, RS-485 Modbus
- Baud rate: 9600 to 115200 (selectable), 8 data bits, 1 stop, no parity
- Dimensions: Ø48*109 mm
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.