Fema I3D Signal duplicator for process signals

Fema I3D Signal duplicator for process signals

SKU: FMB-012

The Fema I3D accepts process signals in 4/20 mA and 0/10 Vdc, provides excitation voltage if needed. Dual 4-20mA outputs. Isolated 4 ways between power, input signal, output 1 and output 2.  We have a service to configure the I3D for you if you require it.


Fema
  • Manufacturer: Fema
Buy more for less:
1-4items$132.87/ each 
5-9items$119.58/ eachsave10%
10or more items$112.94/ eachsave15%
  • $132.87
Qty:  
In stock(2 items available)

The I3D from Fema Electronics is a signal duplicator and signal converter, for process signals, isolated, for industrial applications. Accepts process signals in 4/20 mA and 0/10 Vdc, provides excitation voltage if needed. Dual 4-20mA outputs. 

Isolated 4 ways between power, input signal, output 1 and output 2. Universal power supply from 20 a 240 Vdc and 60 a 240 Vac. Easy and fast configuration through configuration codes. Plug-in screw terminal connections. Functions to generate low and high output signals, to validate remote instrumentation. ‘Password’ function to block access to configuration. Designed for industrial environment, for a wide range of applications, reduced cost, excellent quality and optional customization.

Features

  • 20 to 240 Vdc ±10%, isolated 60 to 240 Vac ±10%, isolated
  • 15V Excitation output
  • 4 Way Isolation Input/Output/Power
  • Input Selectable
    • 4-20mA or 0-10VDC
  • 2 x Outputs: 4-20mA
  • Configuration using push-buttons and display behind front panel.  


    • SKU
      FMB-012
    • Weight
      0.12 kg
    • Dimensions (L x W x H)
      11 x 9 x 4 cm

Power supply:

Voltage range: 20 to 240 Vdc ±10%, isolated 60 to 240 Vac ±10%, isolated 

AC frequency: 45 to 65 Hz 

Consumption: ≤ 4.5 W

Input signal ranges:

Process: 4/20 mA, 0/10 Vdc (active and passive) excitation voltage +15 Vdc @25 mA 

Input impedance: <2 Vdc voltage drop on terminals, in mA >1 MOhm, in Vdc 

Maximum oversignal: 25 mA, 25 Vdc

Accuracy: at 25 ºC 0.3 % F.S. for mA, 0.3 % F.S. for Vdc

Thermal stability: 150 ppm/ºC (F.S.)

Step response: ≤ 300 mSec. (0 % to 99 % signal)

Output 1 signal ranges:

Active 4/20 mA signal: 4/20 mA active, max. >20.5 mA, min. ≤ 1.0 mA, load < 400 Ohm 

Passive 4/20 mA signal: 4/20 mA passive, max. 30 Vdc on terminals

 Output 2 signal ranges:

Active 4/20 mA signal: 4/20 mA active, max. >20.5 mA, min. ≤ 1.0 mA, load < 400 Ohm 

Passive 4/20 mA signal: 4/20 mA passive, max. 30 Vdc on terminals 

0/10 Vdc signal: 0/10 Vdc, max. 10.5 Vdc, min. ≤ -0.05 Vdc, load > 10 KOhm

Isolation 4 ways:

Between all circuits 2300 Veff (60 seconds) 

except input - output 2 1500 Vdc (60 seconds)

Environmental:

IP protection: IP30 

Impact protection: IK06 

Operation: from 0 to +50 ºC 

Storage: from -20 to +70 ºC 

‘warm-up’ time: 15 minutes 

Humidity: 0 to 95 % non condensing 

Altitude: up to 2000 meters

Mechanical:

Size: 106 x 108 x 22.5 mm 

Mounting: standard DIN rail (35 x 7.5 mm)

Weight: ≤ 150 grams 


Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought