TSC200-15 - 1-Wire AC and DC Current sensor
SKU: TCS-010
TSC200-15 is a galvanic isolated AC and DC current sensor with 1-Wire digital interface. The device is based on a fully integrated Hall-effect current sensor IC.
TSC200-15 is a galvanic isolated 1-Wire current sensor. Each sensor has a unique 64-bit serial code, which allows multiple sensors to be connected on the same 1-Wire bus. TSC200-15 is based on fully integrated Hall-effect current sensor IC, that provide highly accurate, low noise output voltage signals that are proportional to an applied current. Additional signal processing provides calibrated digital output. 1-Wire current sensor TSC200-15 provides a low cost option for AC or DC current monitoring. The sensor can be used for power monitoring applications – current and power measurements for building’s management systems (BMS), monitoring and control of batteries, solar systems, industrial automation etc.
TSC200-15 utilizes two RJ11 connectors, for easy daisy chain arranging of 1-Wire bus. It is supported by TCW240B Ethernet controller..
- AC current range: 0.3 to 15 A
- DC current range: ±0.3 to ±15 A
- Accuracy (-20 to +25°C): ±(2% + 0.2 A)
- Communication interface: 1-Wire
- Isolation Voltage: 3000 Vrms
- Supply voltage range (1-Wire bus): 4.0 to 5.5 V
- Maximum supply current (1-Wire bus): 15 mA
- Input AC current range: 0.3 to 15 A
- Input DC current range: ± (0.3 to 15) A
- Accuracy (-20 to +25°C): ± (2% + 0.2 A)
- Accuracy (+25 to +70°C): ± (2% + 0.1 A)
- Resolution: 0.1 A
- Dimensions: 85 x 35.1 x 23.5 mm
- Operating temperature range: 0 to +40 °C
- Operating humidity range: 0 to 70 %RH
- Isolation voltage: 3000 Vrms
- Maximum working voltage for basic isolation: 277 VAC
- AC frequency: 48 to 65 Hz
Faulty Goods and Warranty
Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.
Our standard warranty period is 12 months from the date of purchase unless stated otherwise.
Other warranty periods:
Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.
Returns Policy
If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.
Please note:
- The product returned will attract a 20% restocking fee.
- The customer must pay the delivery costs.
- Non standard, custom made or a specially manufactured or imported products are not returnable.
- Semiconductors, books and software are not refundable
Full Terms and Conditions
By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.
