Sensors

Cabled integrated sensor suite collects weather data and sends it to the cabled Vantage Pro2 console or weather Envoy.

Cabled integrated sensor suite collects weather data and sends it to the cabled Vantage Pro2 console or weather Envoy. Includes solar radiation and UV sensors.

Measures both wind speed and direction using ultrasonic signals calibrated with temperature. Solar-powered with battery backup. Includes mounting hardware, battery, aligning tool, and 12m cable.

High quality wind speed and direction sensor as used by the Davis Vantage Pro2™ & Vantage Pro® weather stations. Suits our anemometer interface cards KTL-250.

Silicon photodiode with wide spectral response for measuring solar irradiance. Suits our Davis weather stations and UV-Solar-Wind Modbus gateway.

Ultraviolet radiation sensor for our Davis weather stations or UV-Solar-Wind Modbus gateways. Measures the sunburning portion of the UV spectrum.

High quality wind speed and direction sensor as used by the Davis weather stations. Suits our anemometer interface cards.

DeltaOHM HD53LS.S is a 2-axis ultrasonic static anemometer - high sensitivity to detect very low speeds. Measurement of wind direction, wind speed, and wind gust.  

Includes 5m cable. Pole is not included.

Senses rainfall with no moving parts. 6 different modes of operation. Works as a tipping bucket, skylight rain sensor, wiper control, drop detection or irrigation control sensor.

Combine the Hydreon RG-11 Optical Rain Sensor with a Novus 6 Digit Counter.

Hydreon RG-15 Solid State Tipping Bucket is a rainfall measuring device intended to replace conventional tipping buckets. Stock has arrived

Hydreon RG-9 Solid State Rain Sensor is a rainfall sensing device intended to detect and communicate when a pre-selected rain intensity has been reached

Senses the level of surface moisture on foliage. Plugs into the Wireless Leaf & Soil Moisture/Temperature Station through which it speaks to a Vantage Pro2 console or Envoy.

Rika Sensor's RK200-03 Pyranometer is based on thermopiles and measures solar radiation. It features a 4-20mA Output, 3 metre cable and 12-24VDC powered.

RK120-01 Combined Wind Speed & Direction Sensor with 4-20 mA outputs. 12~24 VDC powered

The RK200-02 PAR (photo synthetically active radiation) Sensor is mainly used for measuring solar radiation within 400~700nm wavelength for agricultural applications.

The RK200-07 UV Radiation Sensor is used for measuring UVA and UVB radiation within 250~400nm wavelength.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-100 lux range and 0-10VDC Output.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-2000 lux range and 4-20mA Output.

The Rika RK210-01 Illuminance Sensor is used to measure ambient light levels. It has a 0-20000 lux range and 0-10VDC Output.

RK300-02 Dust Sensor using laser scattering principle, detecting the existence of dust(PM2.5) particle concentration in the air.

RK300-02 Outdoor Dust Sensor using laser scattering principle to detect the existence of dust particle concentration in the air. Can detect 1.0μm particles with good consistency and stability. 

This model only detects atmospheric particulate matter (PM) that have a diameter of less than 2.5 micrometers (PM2.5). Other model/combinations are available to detect PM1.0 and PM10.

Full model:  RK300-02B-B-B-A-2000

RK300-03 CO₂ transmitter uses NDIR principle to detect the CO₂ concentration in the air and has built-in precision optical path and temperature sensor compensation.

Rika RK310-01 Atmospheric RTD Temperature Sensor with range: -40~60°C, 4-20mA Output and accuracy of 0.5°C