JX-P420 Series Linear Position Transducer 0-20"

JX-P420 Series Linear Position Transducer 0-20"

SKU: ADS-320

UniMeasure JX-P420 linear position transducer with 20 inch nylon rope. Loop-powered, 4-20mA output. Zero and span adjustment.

  • Manufacturer: Mean Well
Buy more for less:
1-4items$395.44/ each 
5-9items$355.89/ eachsave10%
10or more items$336.12/ eachsave15%
  • $395.44
Qty:  
Available for backorder

The UniMeasure JX-P420 series linear position measuring transducer is a low cost device for use in moderate duty applications in hostile wet or dry environments. The chemical resistant thermoplastic case of the transducer provides NEMA 4 (IP-65) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. The sealed case is achieved through the use of o-rings and a low friction shaft seal. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. The standard electrical connection includes a sealed bulkhead ftting and multi-conductor electrical cable. The wire rope exit direction may be specifed at time of order or may be user adjusted at time of installation.

The JX-P420 series transducer is a loop powered device with a 4 to 20 mA current output that requires a two wire connection. The transducer, power supply, and current monitor are connected in series. Zero and span adjustment potentiometers are accessible by removing two sealing screws in the rear of the transducer housing. Zero and span allow for adjustment for a full 4 to 20 mA output at between 50% and 100% of maximum linear travel.

  • Power supply: Loop powered
  • Output: 4 to 20 mA
  • Operating temperature: -25 to 60 °C
  • Storage temperature: -50 to 80°C
  • Detection distance: 500mm   
  • Protection: IP-65
  • Manufacturer part: JX-P420-20-N11-10S-111
    • SKU
      ADS-320
    • Weight
      0.2 kg
    • Dimensions (L x W x H)
      9 x 6 x 11 cm

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible.Prior to returning faulty items, please contact us with a description of the fault as one of our engineers might be able to assist you by resolving the issue over the phone.
A Warranty form must be filled out and returned with any goods.

Our standard warranty period is 12 months from the date of purchase unless stated otherwise.

Other warranty periods:

Labjack Products: 5 Years
Atop Products: 3 Years
MeanWell Products: 3 Years
Terracom Products: 3 Years

Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not substantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recommended by the manufacturer.

Returns Policy

If you are dissatisfied with our goods you may return them within 14 days of the dispatch date. Contact us for an authorisation and we will refund your purchase less shipping costs and restocking fees. All returned goods MUST be in AS NEW condition including ALL PACKAGING and DOCUMENTATION / MANUALS etc.

Please note:

  • The product returned will attract a 20% restocking fee.
  • The customer must pay the delivery costs.
  • Non standard, custom made or a specially manufactured or imported products are not returnable.
  • Semiconductors, books and software are not refundable

Full Terms and Conditions

By placing an order with Ocean Controls, you agree to be bound by our Terms and Conditions of Trade.

Related products

Customers who viewed this product also bought